Dilemma Stripe Decals for Trucks | Custom Car Decals

Description

Dilemma stripe vinyl decals cut to order for cars and trucks. Choose a width from 12 to 48 inches to fit your build, in matte, gloss, clear or static cling finishes.

Dilemma Stripes, Cut to Your Width

Our dilemma stripe decals bring a bold, angled accent to cars and trucks without the cost or commitment of a paint job. Each set is cut from cast vinyl in your choice of matte, gloss, clear or static cling, so you can match the look you already have on your vehicle. Because every build is different, we offer widths from 12 inches up to 48 inches, letting you run a subtle accent line or a full-width statement piece. The stripes arrive as a ready-to-apply set with transfer tape, so the layout stays aligned while you work. Whether you are dressing up a work truck or adding character to a daily driver, this is a straightforward way to change the profile of your ride.

Custom Car Decals Made to Order

These stripes are part of our custom car decals collection, which means nothing sits on a shelf waiting for you. Each order is cut after you purchase, in the width and finish you select, so the set you receive is made specifically for your application. That made-to-order approach also lets you plan around your own measurements: lay out where you want the stripes to start and stop, then pick the width that fits. If you are pairing these with other decals you already run, the stocked finish options, matte, gloss, static cling and clear, make it easy to keep the surface texture consistent. Take a few minutes to measure before ordering and the results will look intentional, not improvised.

Applying Your Stripe Set

Start with a clean, dry surface free of wax, dust and residue, ideally in moderate temperatures away from direct sun. Position the set with the transfer tape still in place, check alignment from a few steps back, and use masking tape as a hinge if you want to fine-tune placement before committing. Work from the center outward with a squeegee or firm card to push air toward the edges, then peel the tape slowly at a low angle. Cast vinyl conforms to gentle body curves, so take your time over contours rather than stretching the material. If you choose static cling, the process is even simpler since it repositions freely on glass and smooth surfaces.

Finishes, Sizes and Care

Pick matte for a low-sheen, understated look, gloss for a finish that reads like paint, clear for a subtle texture on glass or painted panels, or static cling for a no-adhesive option you can remove and reposition anytime. Widths run from 12 inches to 48 inches to suit everything from a compact car to a full-size truck bed. Once applied, wash by hand with mild soap and a soft cloth, and avoid high-pressure sprays directly on the stripe edges. Skip automated brush washes, as brushes can catch and lift edges over time. With basic care, the set stays looking like part of the vehicle rather than an afterthought.

What you get

• Dilemma stripe decal set for cars and trucks
• Available in 12" 18" 24" 36" and 48" widths
• Choose matte, gloss, clear or static cling finish
• Cut to order from cast vinyl for flexibility over curves
• Ships with transfer tape for aligned, one-piece application
• Static cling option repositions without adhesive on smooth surfaces
• Hand-cut and packed in our US shop after you order

Specifications

Frequently asked questions

How do I choose the right stripe width?

Measure the area where you want the stripes to sit, from edge to edge, before ordering. A 12-inch set works well for accent lines on smaller vehicles, while 36- and 48-inch widths suit truck beds and full panels. When in doubt, measure twice and choose the width closest to your layout.

Can these stripes be removed later?

Yes. Warm the vinyl gently with a hair dryer and peel slowly at a low angle. Any remaining adhesive can be cleaned off with an adhesive remover safe for automotive paint. Static cling peels off cleanly with no residue since it uses no adhesive at all.

Will they work over curves and body lines?

Cast vinyl is designed to conform to gentle curves and body contours. Apply slowly from the center outward and let the material relax over contours instead of stretching it, which helps prevent lifting at the edges.