Racing Stripes Vinyl Decal Kit for Crossover SUVs

Description

A two-stripe racing stripe decal kit cut from Cast Vinyl, sized for crossover SUV owners who want a motorsport look without paint. Choose matte, gloss, clear or static cling.

Racing Stripes That Fit Your Daily Crossover

This racing stripe kit brings a track-inspired look to a crossover SUV without any paintwork or permanent commitment. Each kit is cut to order in your choice of 4, 8, 12 or 18 inch stripe widths, so you can go subtle with slim accent lines or bold with a wide dual-stripe layout across the hood, roof and tailgate. The vinyl conforms to the gentle body curves of modern crossovers, and the stripes can be trimmed on the vehicle for a clean edge at panel gaps. Whether you drive your SUV to work or to the trailhead on weekends, this is an affordable way to make it stand out in a parking lot full of lookalikes.

Four Finishes and Four Stripe Widths

Every kit is available in four finishes to match your build. Matte gives a low-key, flat motorsport look that hides fingerprints and glare. Gloss delivers the classic high-shine stripe most people picture on a race car. Clear vinyl offers a protective ghost stripe that works over factory paint of any color. Static cling uses no adhesive at all, so you can reposition or remove the stripes whenever you like. Stripe widths come in 4, 8, 12 and 18 inches, and each set includes matching left and right stripes so the layout stays symmetrical from one side of the vehicle to the other.

Easy Weekend Installation

Installation is a straightforward do-it-yourself project for most owners. Start with a clean, wax-free surface, then use the alignment tape hinges to position each stripe before peeling the backing. A felt-edge squeegee smooths the vinyl down while pushing air out to the edges, and the material's air-release properties help prevent bubbles. Mild heat from a hair dryer or heat gun lets the vinyl stretch around curves, mirrors and door handle recesses. Two people make the long roof runs easier, but one patient person can finish a full kit in an afternoon with basic tools.

Cut to Order in Our US

Each kit is printed and cut in-house after you order, so nothing sits rolled up in a warehouse losing tack before it reaches you. We ship with application tape, a squeegee and illustrated instructions, and our team can answer layout questions before you install if you send a photo of your vehicle. Because the stripes are cut to your chosen width, you can order a second set in a different finish later if you want to change the look. Removal is a matter of warming the vinyl and peeling it away, leaving your factory paint ready for the next design.

What you get

• Cast Vinyl racing stripe kit cut to your chosen width
• Available in matte, gloss, clear and static cling finishes
• Four stripe width options: 4, 8, 12 or 18 inches
• Includes matching left and right stripes for a symmetrical layout
• Air-release vinyl helps prevent bubbles during installation
• Static cling version is repositionable and adhesive-free
• Printed and cut to order in our US

Specifications

Frequently asked questions

Which stripe width should I choose for my SUV?

For a subtle accent, 4 or 8 inch stripes work well on hoods and rocker panels. The 12 and 18 inch widths create the classic wide dual-stripe racing look across the hood and roof. All four sizes include a left and right stripe.

Will the stripes damage my factory paint?

Applied to clean, factory-cured paint, the vinyl is designed to remove cleanly when warmed with a hair dryer. Avoid installing on fresh or uncured paint, and avoid harsh pressure washing directly at the stripe edges.

Can I take the stripes off and reuse them?

The static cling version can be removed and reapplied many times since it uses no adhesive. The adhesive vinyl finishes are intended for one-time application and should be replaced with a new kit if removed.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.