Racing Stripes Decal Kit for SUVs and Cars

Racing Stripes Decal Kit | Toyota RAV4 Decals

A racing stripes decal kit for drivers who want a bold, custom look without a paint. Cut from Cast Vinyl and sized to fit the roof, hood or tailgate of your SUV.

Free shippingUSA: 5-7 days. International: 10-12 days.

Four finishesMatte, gloss, static cling or clear vinyl.

Made to orderNo returns for change of mind. Damaged orders are refunded or replaced.

Custom artworkUpload a sketch, logo or photo before adding to cart.

Size

Clear

Have your own design? Optional

Upload a logo, sketch or photo

JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.

Description

A racing stripes decal kit for drivers who want a bold, custom look without a paint. Cut from Cast Vinyl and sized to fit the roof, hood or tailgate of your SUV.

Give Your SUV the Toyota Racing Stripes Look

This racing stripes decal kit brings a motorsport-inspired accent to your daily driver. Each kit is cut from Cast Vinyl in a clean stripe layout that follows the lines of your SUV, so it reads as a deliberate design choice rather than a random sticker. Whether you want a subtle pair of stripes down the hood or a full-length run from roof to tailgate, the kit gives you the pieces to lay it out your way. It is a weekend project you can finish with basic tools, and it changes the whole attitude of the vehicle for a fraction of what a custom paint job would cost. Choose the stripe width that matches the statement you want to make.

Choose Your Stripe Width: 4, 8, 12 or 18 Inches

Every build is different, so this kit is offered in four decal sizes. The 4 inch width is a slim, understated accent that works well on smaller panels or as a secondary detail. The 8 inch width is the most popular middle ground, wide enough to read clearly from across a parking lot without overwhelming the body lines. The 12 inch width makes a stronger statement across the hood or roof, and the 18 inch width is for drivers who want maximum presence. Measure the panel you plan to dress before ordering, and remember that the stripes can be trimmed during installation for a clean edge at body seams and trim.

Matte, Gloss, Clear and Static Cling Finishes

Pick the finish that matches your vehicle and your plans. Gloss stripes sit closest to a factory paint look and pair naturally with a clear-coated body. Matte stripes create contrast against glossy paint and give the kit a modern, low-shine character. Clear stripes are a subtle option that adds texture without changing the color underneath. Static cling pieces apply without adhesive, so you can reposition or remove them whenever you like, which makes them a good way to test a layout before committing to adhesive vinyl. All options are cut from quality cast or calendered vinyl suited to flat and gently curved exterior panels.

Install at Home with Wet or Dry Application

You do not need a to install this kit. Start with a clean, dry, wax-free surface and work in moderate temperatures out of direct sunlight. A wet application using a slip solution lets you slide the stripes into position and squeegee out moisture for a smooth, bubble-free lay-down. A dry application works well for narrower stripes and smaller panels. Take your time aligning the first stripe, then use it as the reference for the rest of the kit. Detailed instructions ship with every order, and the vinyl can be lifted and repositioned during installation before final squeegeeing.

What you get

Racing stripes decal kit available in 4, 8, 12 or 18 inch widths
Cut from cast or calendered vinyl for exterior use
Finish options: matte, gloss, clear and static cling
Suitable for roof, hood, tailgate and side panels
Wet or dry application with basic household tools
Repositionable during installation before final squeegeeing
Trim-to-fit pieces for clean edges at body seams

Specifications

Material	Cast or calendered vinyl, cut to order
Finish	Matte, gloss, clear or static cling
Application	Exterior body panels; wet or dry install
Set contents	Stripe decal pieces, transfer film, squeegee card and illustrated instructions

Frequently asked questions

Will these stripes fit my specific SUV model?

The kit is a universal racing stripes layout rather than a model-specific template. The four width options and trim-to-fit pieces let you adapt the stripes to your roof, hood or tailgate, but we recommend measuring your panels and choosing the width that suits them before ordering.

What is the difference between static cling and adhesive vinyl?

Static cling uses no adhesive, so it holds to smooth glass and glossy panels through static attraction and can be removed or repositioned at any time. Adhesive vinyl bonds more permanently and is the better choice for long-term exterior use on painted body panels.

Can I remove the stripes later without damaging the paint?

Adhesive vinyl can be removed by peeling at a low angle, ideally with gentle heat from a hair dryer on a warm day, which softens the adhesive. Work slowly and avoid pulling straight up. Any remaining adhesive residue can be cleaned with a mild adhesive remover.