By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A matte black racing stripe decal kit cut to dress up the hood of your 4Runner. Choose 4, 8, 12 or 18 inch stripe widths to get the look you want.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This decal kit brings a classic dual racing stripe treatment to the front of your 4Runner without any shine. The matte finish reads as a painted-on look once applied, which is why so many owners pair it with factory flat or Low-Gloss paint tones. Each kit is cut from Cast Vinyl in our and ships as a ready-to-apply set with masking film on top, so the stripes go down in position as one piece per side. Pick the stripe width that matches your build: 4 inch for a subtle accent, 8 inch for a balanced look, 12 inch for a bold statement, or 18 inch for full-width coverage across the hood. No cutting, measuring or trimming is required before installation.
Shine is the enemy of a clean stripe. A gloss stripe can fight with the clear coat and look like an aftermarket afterthought, while a matte stripe settles into the paint and reads as part of the truck. That is the reason our toyota racing stripes collection leans heavily on matte finishes for hood applications. The surface has a low sheen that hides fingerprints, water spots and light swirl marks far better than a gloss decal, which matters on a vehicle that actually gets driven off the pavement. If your 4Runner sees trail dust, road grime or wash-bay spray, the matte face keeps looking intentional instead of tired.
Installation is a wet-apply process, which gives you time to slide each stripe into exact position before it sets. Clean the hood with isopropyl alcohol, mist the area with application fluid, lay the masked stripe in place, and squeegee from the center outward. The masking film keeps the two stripe edges perfectly parallel while you work. Once the film is peeled, the vinyl stays put. A second set of hands helps on the wider 12 and 18 inch sizes, but a solo install is realistic with patience. Full step-by-step instructions are included in the package, along with a small squeegee, so you have what you need on day one.
Stripe width is measured per stripe, not across the pair. The 4 inch size sits close to the hood centerline and suits owners who want a hint of contrast. The 8 inch size is our most popular pick, filling the hood without touching the body lines. The 12 inch size makes the stripes the focal point of the front end and pairs well with larger wheels or a lifted stance. The 18 inch size covers most of the hood panel and delivers the strongest visual change. If you are torn between two sizes, measure the flat area of your hood between the raised character lines first, then choose the width that fits inside it.
The kit is trimmed to the hood area rather than a specific model year, and the wet-apply method lets you fine-tune placement. Measure the flat section of your hood between the character lines and compare it to your chosen stripe width before ordering.
Yes. Warm the vinyl with a hair dryer or heat gun on low and peel it back slowly at an angle. Any remaining adhesive can be cleaned off with isopropyl alcohol.
Hand washing is the safest approach for any Vinyl Decal. Avoid high-pressure spray directly at the stripe edges, and skip automatic brush washes, which can lift the corners over time.
Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
