Matte Jeep Easter Egg Decal 12 Inch Vinyl Sticker

Description

A matte black vinyl Easter egg decal sized for Jeep owners who like hiding a little surprise on their ride. Cut from durable Cast Vinyl for a clean, low-shine look.

A Matte Jeep Easter Egg Decal That Hides in Plain Sight

Jeep owners know the fun of finding the little Easter eggs the designers tucked into the vehicle, and this decal lets you add your own. The matte finish blends with flat paint, trim, and window tint instead of standing out like a shiny sticker. At 12 inches, it is large enough to read from a few car lengths away but still subtle up close. Place it on a rear window, fender, hood, or tailgate and let people discover it on their own. It is a simple way to join the community joke without saying a word, and it looks right at home next to other trail-ready gear.

Four Size Options for Any Spot on Your Rig

Every build is different, so this Easter egg decal comes in four sizes: 4, 8, 12, and 18 inches. The 4 inch works well for mirror caps, fuel doors, and interior trim. The 8 inch suits rear quarter panels and windshield corners. The 12 inch, featured here, is the go-to for tailgates and side windows where you want visibility without shouting. The 18 inch fills a hood, hardtop side, or rear glass on larger builds. Measure your spot before ordering, and remember the listed size refers to the decal's longest dimension. All sizes are cut from the same matte Cast Vinyl.

Matte Cast Vinyl Built for Daily Drivers

This decal is printed on matte Cast Vinyl, a thin, conformable material that follows gentle body curves without lifting at the edges. The matte surface cuts glare, so it reads clearly even in direct sun and matches the texture of flat and Low-Gloss paints. It applies with a standard peel-and-stick method using transfer tape, and it can be repositioned during application while the tape is still on. Once pressed down and smoothed out, it stays put through washes and weather. Clean the surface with rubbing alcohol first, apply above 60F, and keep it dry for the first day.

Application Tips and Care

Start by washing the area and drying it fully, then wipe with isopropyl alcohol to remove wax and residue. Peel the backing, position the decal, and use a squeegee or credit card from the center outward to push out air. Slowly pull the transfer tape back on itself at a sharp angle. Avoid applying in freezing temperatures or on fresh paint. For long-term care, skip high-pressure washers directly on the edge and hand wash with mild soap. If you ever want to remove it, warm it gently with a hair dryer and peel slowly; any leftover adhesive comes off with adhesive remover.

What you get

• Matte black finish that blends with flat paint, trim, and tinted glass
• Available in 4, 8, 12, and 18 inch sizes to fit any panel or window
• Cut from thin, conformable Cast Vinyl that follows body curves
• Low-glare surface stays readable in direct sunlight
• Peel-and-stick application with transfer tape included
• Outdoor-rated vinyl suitable for doors, tailgates, and rear windows
• Removes cleanly with heat when you are ready for a change

Specifications

Frequently asked questions

Will the matte finish match my flat paint?

Matte vinyl is the closest match for flat and Low-Gloss paint jobs and blends well with black trim and window tint. On glossy paint it will read as a flat black Graphic, which many owners prefer for a subtle look.

Where do most people put this decal?

Popular spots include the rear window, tailgate, fender flares, and hood. The 12 inch size works well on side windows and tailgates, while smaller sizes fit mirror caps and fuel doors.

Can it go through a car wash?

Once fully applied and smoothed, the decal holds up through normal washing. Avoid aiming a high-pressure washer directly at the decal's edge, and hand washing with mild soap is the gentlest option.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.