18 Inch Racing Stripe Decal Kit | Ford Bronco Decal Kit

Description

A racing stripe decal kit for truck and SUV owners who want a classic motorsport look without a paint. Cut from durable vinyl and sized at 18 inches, it is made for drivers upgrading their ride with a do-it-yourself stripe set.

Classic Racing Stripes for Your Ford Bronco Decal Kit Build

Racing stripes have been part of American car culture for decades, and this 18 inch decal kit brings that look to modern trucks and compact SUVs. Whether you are building out a full Ford Bronco decal kit theme or just adding one bold accent, the stripe set lays down clean over factory paint, glass, and smooth trim. The design works on hoods, tailgates, roof panels, and body sides. Each stripe is pre-cut so you do not need to slice lines yourself, and the kit arrives ready to position with transfer film. If you have applied a bumper sticker, you can handle this install with a little patience and a squeegee or soft card.

Matte, Gloss, Clear and Static Cling Finish Options

Every stripe kit is printed in the finish you choose at checkout. Matte gives a flat, low-shine motorsport look that photographs well and hides small imperfections in the surface. Gloss delivers the high-shine finish most people picture when they think of vintage race cars. Clear vinyl works when you want the stripe to read subtle against your paint color. Static cling is the pick for temporary display, since it holds without adhesive and peels off when you are done. All options are cut from vinyl film made for outdoor vehicle use. Pick the finish that matches the rest of your build, or mix finishes across different panels for a layered look.

How to Install Your 18 Inch Stripe Decals

Start with a clean, dry surface. Wash the panel, remove wax with isopropyl alcohol, and let it fully dry. Plan your layout with masking tape before removing any backing paper, and use the tape as a hinge to hold each stripe in place. Peel the backing, squeegee from the center outward to push out air, then slowly pull the transfer film back at a low angle. Work in moderate temperatures and out of direct sun so the vinyl conforms properly. For curved areas like hood crowns, a little heat from a hair dryer softens the stripe so it stretches into the contour. Take your time with alignment, since the vinyl can be repositioned lightly before you press it down firmly.

Care, Removal and Reordering

Once applied, the stripes can be washed by hand along with the rest of the vehicle. Skip high-pressure spray wands directly at the stripe edges, and avoid automated brush washes, which can lift corners over time. When you are ready for a change, warm the vinyl with a hair dryer and peel it back slowly at a shallow angle; any leftover adhesive generally comes off with a mild adhesive remover and a microfiber cloth. If you want to extend the stripe theme to other panels, the kit is also offered in 4, 8, and 12 inch sizes so you can scale accents across mirrors, fenders, or interior trim. Order a second kit to keep spare stripes on hand for future projects.

What you get

• 18 inch racing stripe decal kit pre-cut and ready to apply
• Available in matte, gloss, clear and static cling finishes
• Printed on cast or calendered vinyl suited for outdoor vehicle use
• Works on hoods, tailgates, roofs and smooth body panels
• Includes transfer film for easier positioning during install
• Also offered in 4, 8 and 12 inch decal sizes
• Removable with gentle heat when you want a change

Specifications

Frequently asked questions

Will these stripes fit my specific truck or SUV?

The kit is a universal racing stripe set, not a model-specific fitment. The 18 inch size works well on hoods, tailgates and body panels of most trucks and compact SUVs. Measure your panel first to confirm the layout you want.

Can I take the stripes off later?

Yes. Warm the vinyl with a hair dryer and peel slowly at a low angle. Clean up any remaining adhesive with a mild adhesive remover. Static cling finishes remove with no adhesive at all.

What is the difference between the size options?

The kit comes in 4, 8, 12 and 18 inch decal sizes. Larger sizes suit hoods and tailgates, while smaller sizes work for mirrors, fenders and interior accents. You can mix sizes across your build.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.