By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A two-piece Vinyl Decal set sized for truck side and rear windows, cut from durable Cast Vinyl in your choice of matte, gloss, clear or static cling finish. Made for Super Duty owners who want a clean, custom look.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This decal pair is designed to be applied as a mirrored set, one on each side of your truck, so the graphics line up evenly whether you place them on the front doors, rear side glass, or back window. Each decal is cut from Cast Vinyl, which conforms to the slight curves of window glass and door panels without lifting at the edges. You choose the finish: matte for a low-key, painted-on look, gloss for a bold shine, clear for a subtle tone-on-tone effect, or static cling if you want something you can reposition or remove without leaving adhesive behind. Sold as a matched pair so both sides of your truck match from the first application.
Every truck and every build is different, so this set comes in four decal sizes. The 4 inch pair works well on quarter windows, mirror caps, or as a small accent near the door handle. The 8 inch size is a popular middle ground for front door glass and toolboxes. The 12 inch decals fill out a rear side window or the lower corner of a back glass nicely. The 18 inch pair makes a statement across full-size door panels or a rear window. Measure the flat area where you plan to apply before ordering, and remember to leave a little clearance around window seals and trim so the decal sits fully on a smooth surface.
Application takes a few minutes with basic tools: a squeegee or credit card, masking tape, and a spray bottle of water with a drop of dish soap for the wet method. Clean the glass or painted surface thoroughly and let it dry completely. Position one decal with masking tape, peel the backing, and squeegee from the center outward to push out air and moisture. Repeat with the mirrored piece on the other side, stepping back to check alignment before pressing everything down firmly. Static cling versions skip the adhesive entirely, so you can peel and reposition them until the placement looks right. Full instructions ship with every order.
Once applied, the decals can be washed with normal car soap and a soft cloth or mitt. Avoid high-pressure spray directly at the edges and skip abrasive waxes or brushes over the Graphic. When you are ready for a change, warm the decal gently with a hair dryer on low and peel it away slowly; Cast Vinyl typically comes off in one piece, and any leftover adhesive cleans up with isopropyl alcohol. Each order includes the matched decal pair, application tape where needed, and illustrated instructions. Priced in line with comparable truck decal sets, and printed to order in our US so you get a fresh, clean-cut pair every time.
You receive a matched pair of mirrored decals, designed so one goes on each side of your truck and the graphics face the same direction when viewed from either side.
It depends on the flat space available. Measure the smooth area between any window seals and trim, then choose the closest size that fits with a little clearance. The 12 and 18 inch sizes are common choices for rear glass on full-size trucks.
Yes. Warm the decal with a hair dryer on low heat and peel it off slowly. Any remaining adhesive can be cleaned with isopropyl alcohol. The static cling version peels off cleanly with no adhesive at all.
Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
