Mustang Stripe Decal Pack of 4 Racing Stripes

Mustang Stripe Decal Pack of 4 | Vinyl Racing Stripes

A four-piece stripe decal pack for Mustang owners who want a classic racing stripe look without a full wrap. Choose from 4, 8, 12 or 18 inch decal sizes in matte, gloss, clear or static cling finishes.

Free shippingUSA: 5-7 days. International: 10-12 days.

Four finishesMatte, gloss, static cling or clear vinyl.

Made to orderNo returns for change of mind. Damaged orders are refunded or replaced.

Custom artworkUpload a sketch, logo or photo before adding to cart.

Size

Clear

Have your own design? Optional

Upload a logo, sketch or photo

JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.

Description

Classic Racing Stripe Look for Your Mustang

This stripe decal pack gives your Mustang the twin-stripe styling that muscle car fans have loved for decades. Each set includes four matching stripe decals cut from Cast Vinyl, so you can run a pair down the hood and a pair along the trunk, or split them between the sides for a rally-inspired layout. The clean, simple design works on any paint color, and because the stripes are separate pieces, you control the spacing and placement. Whether you are restoring a weekend cruiser or dressing up a daily driver, this pack offers an easy way to change the look of your car in an afternoon with basic tools you already have at home.

Four Finishes and Four Sizes to Match Your Build

Every Mustang owner builds differently, so this decal pack comes in your choice of matte, gloss, clear or static cling finishes. Matte gives a low-key, modern muscle look. Gloss matches or contrasts with factory paint for a traditional stripe appearance. Clear vinyl blends in for a subtle tone-on-tone effect, and static cling lets you test the layout without committing to adhesive. Sizes are sold as 4, 8, 12 or 18 inch decals, so you can go slim and understated or wide and bold. If you already own pieces from our Ford Bronco decal kit collection and want a matching stripe treatment for your Mustang, the finish options line up across both product lines.

Easy DIY Application with Clean Results

You do not need a install to get straight, professional-looking stripes. Each decal arrives pre-cut and ready to apply with a standard dry or wet application method using a squeegee or soft card. Start with a clean, wax-free surface, use light masking tape to align the pair, and work from the center outward to push out air. The Cast Vinyl conforms to gentle body curves, and the material can be repositioned during application while the fluid is still wet. Full step-by-step instructions are included with every pack. Most customers finish a hood-and-trunk layout in a single session, and the result looks like it was done by hand at a body.

Removal and Care Without the Guesswork

When you are ready for a change, the decals remove cleanly with heat from a hair dryer or heat gun and steady peeling at a shallow angle. Warm the vinyl, pull slowly, and lift the adhesive away without aggressive scraping. Any remaining residue comes off with a mild adhesive remover and a microfiber cloth. For everyday care, wash the car as you normally would, avoiding high-pressure spray directly at the stripe edges. Static cling versions peel off in seconds with no residue at all, which makes them a favorite for car shows, photo days, or anyone who likes to switch up their Mustang styling by season.

What you get

Four-piece stripe decal pack designed for Mustang hood, trunk or side panels
Available in matte, gloss, clear and static cling finishes
Sold in 4, 8, 12 or 18 inch decal sizes
Cut from Cast Vinyl that conforms to gentle body curves
DIY-friendly application with included step-by-step instructions
Removes cleanly with heat when you want a new look
Static cling option offers temporary, residue-free styling

Specifications

Material	Cast Vinyl (static cling option uses non-adhesive cling film)
Finish	Matte, gloss, clear or static cling
Application	Dry or wet method with squeegee or soft card; works best on clean, wax-free paint
Set contents	4 matching stripe decals per pack

Frequently asked questions

Do these stripes fit every Mustang model year?

The decals are universal stripe pieces, not model-specific cut kits, so they work on any Mustang with a relatively flat or gently curved surface. Because you place each stripe yourself, you can trim or position them to suit your hood, trunk or side panels.

What is the difference between the adhesive and static cling versions?

Matte, gloss and clear finishes use adhesive Cast Vinyl for a long-term look. Static cling has no adhesive at all; it holds to smooth glass or glossy paint by suction, so it is best for temporary display and removes instantly with no residue.

Which size should I choose for a hood stripe?

It comes down to the look you want. The 4 and 8 inch decals give a slim, classic stripe pair, while the 12 and 18 inch sizes create a wide, bold muscle car statement. Many customers order one size for the hood and a smaller size for the trunk.