Dragon Tail Boat Decals, Set of 2 Cast Vinyl Stickers

Description

A set of two dragon tail vinyl decals cut from cast vinyl, made for boat owners who want a bold graphic on each side of the hull. Available in widths from 12 to 48 inches with matte, gloss, clear or static cling finishes.

Dragon Tail Design for Your Hull

This dragon tail decal set brings a sweeping, scaled graphic to your boat, with a curved silhouette that follows the natural lines of a hull. Each set includes two matching decals, so you can mirror one on each side for a balanced look as you pass on the water. The design reads clearly from a distance, which makes it a popular choice for runabouts, pontoons and center consoles alike. Whether you want a subtle accent near the stern or a large statement along the gunwale, the size range lets you scale the graphic to fit your boat without trimming or guesswork.

Cast Vinyl Built for Marine Use

Each decal is printed on cast vinyl, a thin and conformable material that follows gentle curves and compound surfaces better than thicker films. Cast vinyl resists water, sun and salt exposure, and it lays down smoothly without lifting at the edges when applied to a clean gelcoat or painted surface. We offer matte, gloss, clear and static cling finishes. Matte softens glare on bright days, gloss adds depth to the artwork, clear blends the graphic into your hull color, and static cling lets you reposition or remove the decal without adhesive residue. Choose the finish that matches how you use your boat.

Applying Your Boat Decals

Application works best on a dry, warm day with the hull cleaned of wax, salt and dust. Position each decal with masking tape, peel the backing, and squeegee from the center outward to push out air. The cast vinyl conforms to mild curves, so take your time on curved sections and let the material stretch into place. For static cling, a light mist of water helps you slide the graphic before you press it down. Full instructions ship with every set. If you store the boat for winter, a gentle wash with mild soap keeps the decals looking clean for the next season on the water.

Sizing and Set Details

Each set includes two identical dragon tail decals, one for each side of your boat. Widths run from 12 inches up to 48 inches, measured at the widest point of the graphic. A 12-inch pair suits small craft, transoms and personal watercraft, while 36 and 48-inch sets fill the sides of larger hulls. Before ordering, measure the flat or gently curved area where you plan to place each decal and compare it to the listed width. If you are pairing this design with other boat decals from our marine collection, keep spacing even between graphics so the hull reads as one cohesive layout.

Care and Maintenance on the Water

Keeping your dragon tail decals looking sharp takes only a little routine attention. After each outing, rinse the graphics with fresh water to remove salt, sand, and grime that can slowly wear down the cast vinyl surface. When washing the hull, use a mild soap and a soft cloth or sponge, working along the decal edges rather than scrubbing across them. Avoid high-pressure spray nozzles aimed directly at the sticker borders, since concentrated streams can lift the material over time. Skip harsh solvents, abrasive pads, and stiff brushes near the graphics. If you notice a lifted edge, press it back down with a soft applicator or your fingertip. With consistent, gentle care, the decals will hold their color and adhesion season after season on the water.

Pairing Decals with Your Boat Style

The dragon tail design works across a range of hull colors and boat types, from fishing rigs to pontoon decks and runabouts. On darker hulls, the graphic creates a bold contrast that draws the eye along the waterline, while lighter surfaces let the details of the tail read more softly. Some boaters place the pair on opposite sides of the bow for a mirrored look, and others position them near the stern for a trailing effect as the boat moves. Before committing, hold each decal in place with low-tack masking tape and step back to view the layout from the dock. Consider how the design lines up with existing striping, registration numbers, or hardware. A little planning helps the dragon tail flow naturally with the lines of your hull.

What you get

• Set of 2 matching dragon tail decals, one per side of the hull
• Printed on cast vinyl for flexibility on curved surfaces
• Available in matte, gloss, clear and static cling finishes
• Widths from 12 to 48 inches, measured at the widest point
• Suitable for gelcoat, painted hulls, smooth fiberglass and glass
• Indoor or outdoor application on boats, personal watercraft and trailers
• Application instructions included with every set

Specifications

Frequently asked questions

Do I get two decals with this design?

Yes. Each order includes two matching dragon tail decals so you can apply one to each side of your boat for a mirrored look.

Which finish should I choose for a boat?

Matte reduces glare on sunny days, gloss gives the artwork a polished look, clear lets your hull color show through the graphic, and static cling can be removed and repositioned without adhesive. All four work on marine surfaces.

How do I pick the right size?

Measure the area of the hull where you want each decal, then choose a width that fits within that space. The listed size is the width at the widest point of the graphic, and each set includes two decals at that size.