By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
Matte and gloss vinyl hood stripes designed for Ram truck owners who want a custom look without paint. Available in 4, 8, 12 or 18 inch decal sizes.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
If you have spent any time scrolling truck builds online, you already know the look: clean stripe decals running down the hood, tying the front end together without a single trip to a body. This vinyl stripe kit gives you that same head-turning result at a fraction of the cost. Each stripe is cut from Cast Vinyl in your choice of matte or gloss finish, sized to match your build whether you want a subtle accent or a bold racing look. The set is designed for truck owners who like to change their style often, because the vinyl removes cleanly when you are ready for something new. Choose from 4, 8, 12 or 18 inch decal sizes to fit your hood layout.
Every set is printed on your choice of matte, gloss, clear or static cling vinyl, so you can match the stripes to the rest of your build. Matte black is the popular pick for owners who want a lowered, blackout look, while gloss finishes pop against flat paint. Static cling gives you a fully temporary option that peels off in seconds with no residue, ideal for shows, meets or photo days. Sizes run from a slim 4 inch pair up to a wide 18 inch pair, letting you decide whether the stripes sit close together near the hood scoop or spread across the full width of the panel. Mix and match finishes across sets if you run different looks season to season.
Installation takes about an hour with basic tools you likely already have. Start by washing the hood thoroughly and letting it dry completely, then lay the stripes in place with masking tape to check positioning before committing. Peel the backing, mist the surface lightly with soapy water if you prefer a slide-adjustable install, and squeegee from the center outward to push out air and water. Finish by trimming any excess at the hood edges with a sharp blade and letting the vinyl set for a day before washing the truck. A heat gun or hair dryer helps the vinyl conform around curves and body lines. Full step-by-step instructions ship with every set, so first-time installers can work confidently.
Once installed, the stripes handle normal driving conditions including rain, sunlight and routine hand washes. Avoid high-pressure spray directly at the stripe edges and skip automatic brush washes, which can lift corners over time. When you are ready for a change, warm the vinyl gently and peel it back slowly at a low angle; any remaining adhesive rubs off with your fingers or a mild adhesive remover. Because the sets are cut to order in our, you can reorder the same size and finish later, or try a different width for a fresh look. If you are building a full theme, pair these hood stripes with matching side graphics or window decals from the same collection.
The stripes are sold by decal size, not by vehicle model, so you can trim them to fit your hood during installation. Measure the width of your hood panel and choose the 4, 8, 12 or 18 inch size that best matches your layout.
Yes. Warm the vinyl with a hair dryer or heat gun on low, then peel it back slowly at a low angle. Any leftover adhesive can be removed with your fingers or a mild adhesive remover. The static cling version peels off with no adhesive at all.
Lifespan depends on your climate, sun exposure and how you wash the truck. Hand washing and parking out of direct sunlight when possible will keep the stripes looking their best for as long as you run them.
Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications