By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A set of two Asian dragon vinyl boat decals, cut from marine-ready vinyl in your choice of matte, gloss, clear or static cling finishes. Made for boaters who want a bold, traditional dragon graphic on their hull or transom.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This Asian dragon graphic brings classic Eastern art styling to your boat in a clean, die-cut vinyl format. The flowing dragon design reads well from a distance, with sweeping lines and detailed scales that hold up visually at both bow and transom placement. Each set includes two matching decals, so you can mirror them on port and starboard, place one on each side of the hull, or use the pair together as a balanced design on a wide transom. The artwork is cut rather than printed, which means there is no background film or clear rectangle around the dragon once installed, just the graphic itself against your gelcoat or paint.
These boat decals are offered in widths from 12 inches up to 48 inches, measured at the widest point of the dragon design. Smaller sizes work well on console doors, cooler lids and storage boxes, while the larger cuts are scaled for hull sides and transoms on center consoles, pontoon boats and cruisers. Every set is available in matte, gloss, clear or static cling. Matte gives a painted-on look that blends with flat or matte gelcoat. Gloss adds shine that catches light on the water. Clear works on glass and tinted surfaces. Static cling peels off without adhesive, ideal for seasonal display or charter boats where graphics change often.
We cut each dragon decal from cast or calendered vinyl suited to freshwater and saltwater environments. The material resists sun fading, salt spray and routine washdowns, and it applies with a wet or dry method using standard marine application techniques. The adhesive holds to smooth gelcoat, painted surfaces, fiberglass and glass, yet the decal can be removed with heat when you want to change your look. Because we finish each order after you place it, your pair is cut fresh in the size and color you select rather than pulled from a shelf. Care is simple: wash with mild soap, avoid high-pressure spray directly on the edges, and wax around the graphic.
Application takes a few minutes per side with basic tools: a squeegee or credit card, masking tape for positioning, and a spray bottle if you prefer the wet method. Clean the surface with isopropyl alcohol and let it dry completely. Tape the dragon in place, check alignment from a few steps back, then peel the backing and squeegee from the center outward to push out air and water. For mirrored port and starboard placement, measure from the waterline or a fixed trim line so both dragons sit at the same height. Full step-by-step instructions ship with every set, and our team can answer sizing questions before you order.
Measure the flat area where you plan to place the dragon, then choose a width that leaves at least a few inches of clearance on each side. A 12-18 inch decal suits consoles and boxes, while 30-48 inch cuts fit hull sides and transoms.
Yes. The set of two is designed for that. Measure from a fixed reference line, like the rub rail or waterline, so both decals sit at the same height on port and starboard.
No. The vinyl removes with heat from a hair dryer or heat gun, and any adhesive residue cleans up with adhesive remover. Avoid sharp tools when peeling to protect the surface underneath.
12", 18", 24", 36", 48"
There are no reviews yet.
You must be logged in to post a review.
Your shopping cart is empty
Notifications
