By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A racing-style rear window Graphic printed on clear static cling, made for drivers who want a motorsport look on their electric sedan without adhesive residue. Part of our model car decals collection.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This rear window racing Graphic brings a track-inspired look to your sedan's glass in minutes. The sweeping stripe layout echoes classic motorsport livery, printed in bold color on clear static cling material. If you have been building out your model car decals collection and want something with more visual weight than a small Graphic or Graphic, this Graphic covers a wide stretch of the rear window and reads clearly from a distance. It works on tinted and untinted glass, and because it clings rather than sticks, you can reposition it during installation until the alignment looks right. Choose the size that matches your window and your taste for subtlety or statement.
Static cling material holds to smooth glass using surface charge instead of glue. That means no sticky film left behind when you remove it, no scraping with a razor blade, and no chemical cleaners needed. Installation is a clean, dry process: clean the glass, peel the Graphic from its backing, and smooth it onto the window from the center outward to push out air. If it lands crooked, peel it back and try again. Removal takes seconds and the Graphic can be stored flat on its backing sheet for later use. This makes it a practical choice for leased vehicles, seasonal styling, or anyone who likes to change their look without commitment.
Each Graphic is printed to order in our US on clear Cast Vinyl using printed inks, then finished as a static cling. The clear carrier means the unprinted areas of the design stay see-through, so the racing stripes sit on the glass while your view through the rear window stays open. We offer matte, gloss, and clear finishes across our line, and this Graphic is produced with a finish suited to clean, crisp line work. Because every piece is printed after you order, you get a fresh decal rather than stock that has sat in a warehouse losing flexibility.
This Graphic comes in four decal sizes: 4, 8, 12, or 18 inches, measured at the Graphic's longest dimension. The 4 inch works as a subtle accent near a corner of the glass or on a side window. The 8 and 12 inch sizes suit most sedan rear windows and are the popular middle ground between visibility and restraint. The 18 inch makes a bolder statement across a wide rear window. Before ordering, measure the flat area of your glass and remember that curved edges and defroster lines can affect placement. When in doubt, a size that leaves margin around the Graphic usually installs more cleanly.
Static cling grips smooth glass well on exterior surfaces in normal driving conditions. For the longest hold, apply to clean glass and smooth it firmly from the center outward. Many customers also apply it to the inside of the rear window, which protects it from weather and car washes.
Yes. Peel it off slowly, place it back on its original backing sheet, and store it flat. As long as the cling surface stays clean and free of dust, it can be reapplied.
The Graphic is printed on clear material, so only the printed stripe areas are opaque. Choose a smaller size if you want to keep most of the window's visibility, or apply it lower on the glass where the view matters less.
Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
