By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A removable static cling banner decal that installs across the top of your windshield with no adhesive. Made for Jeep owners and anyone who wants a clean look they can peel off anytime.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
If you like switching up your Jeep windshield decals with the seasons, this static cling banner is the easy way to do it. Instead of a permanent adhesive strip, it holds to the glass with static alone, so it goes on smooth and peels off clean when you are ready for a change. No sticky residue to scrape off, no razor blade sessions, no leftover ghost line across the top of the glass. It is a smart pick for leased vehicles, daily drivers, or anyone who changes their look often. Apply it across the top of the windshield, smooth it out, and enjoy the style without the commitment of a permanent banner.
Static cling vinyl relies on the smooth, non-porous surface of glass to stay put. When you press the banner onto a clean windshield, the film grips the surface without any adhesive layer underneath. That means removal is as simple as lifting a corner and peeling the whole banner away in one piece. Because there is no glue, you can also reposition it during installation if your first placement is a little crooked. The material is printed on our 's Cast Vinyl in a static cling formulation, available in matte, gloss, or clear finishes depending on the look you want. It works best on the inside of the glass, where it stays protected from weather and car washes.
This banner is offered in decal sizes of 4, 8, 12, or 18 inches, so you can pick the height that fits your windshield and your design. A 4 or 8 inch banner sits as a slim strip along the top of the glass, while 12 and 18 inch options make a bolder statement across the upper windshield. For finish, matte gives a low-key, painted-on look; gloss adds shine that catches the light; and clear works well when you want lettering or a Graphic without a visible background. Measure the flat area at the top of your windshield before ordering, and keep in mind that the banner should sit within your legal visibility zone for your state.
Start with a clean windshield: wash the glass, dry it fully, and wipe the application area with isopropyl alcohol to remove any film or residue. Position the banner before committing, since static cling can be lifted and reset. Work from the center outward with a squeegee or the edge of a card, pushing air toward the edges as you go. If a bubble sneaks in, lift the nearest edge and smooth it back down rather than forcing it. Apply on a mild day if you can, and avoid touching the cling side of the film with oily fingers. When you want to remove or store it, peel slowly and keep dust off the back surface so it can be reused later.
No. Static cling film holds to glass with static, not adhesive, so it removes cleanly without residue or scraping. It is a good option for leased vehicles or windshields you want to keep pristine.
Yes, in most cases. Peel it off slowly and store it flat with the back surface protected from dust and debris. As long as the cling side stays clean, it can be reapplied to the glass.
We recommend the inside of the glass. Interior placement protects the banner from weather, car washes, and road debris, and static cling performs best on a clean, smooth glass surface.
Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
