Gloss Motorcycle Windshield Logo Decal Kit | LEO Sticker

Description

A gloss Cast Vinyl logo decal sized for motorcycle windshields, cut to order in 4, 8, 12 or 18 inch widths. Made for riders who want a clean, -quality look without the price.

A Windshield Logo Decal Built for the Ride

Your windshield takes the bugs, the grit and the weather, so a decal placed on it should be cut and finished with that in mind. This logo decal is printed on gloss Cast Vinyl that lays down smooth on curved glass and holds its edges without lifting at the corners. The gloss finish catches light much like the glass around it, so the decal reads as part of the windshield rather than a sticker sitting on top. Choose 4 inches for a small corner mark, 8 inches for a balanced center or lower placement, 12 inches for a bold statement, or 18 inches when you want the logo to span most of the shield. Each decal ships ready to apply with transfer tape in place.

Why Riders Pick Our Motorcycle Decals Kits

Riders keep coming back to our motorcycle decals kits for one simple reason: they are cut for real bikes, not generic rectangles. Every decal in this kit is trimmed to its artwork with no clear carrier border, so once applied you see the logo itself and nothing else. That contour cut matters on a windshield, where extra film would catch light and distract your view. The gloss surface wipes clean with the rest of the shield using the same soft cloth and mild cleaner you already use. Whether you run a fairing, a tall tour screen or a low fly screen, the decal applies the same way and sits flush with no bubbles when installed with care.

Choosing Between 4, 8, 12 and 18 Inch Decal Sizes

Size is the biggest decision with a windshield decal, and the right answer depends on your screen and your taste. A 4 inch decal works well in a top corner or beside a mirror stem, adding a mark without blocking sight lines. The 8 inch size is the most popular middle ground, large enough to read from a parking spot away but small enough to keep the center of the shield clear. At 12 inches the logo becomes the focal point of the screen, best on taller touring windshields. The 18 inch cut suits wide or tall shields where a smaller decal would look lost. Measure your glass before ordering and leave margin at the edges for a clean install.

Applying Your Gloss Windshield Decal

Installation is a dry, at-home job that takes a few minutes with patience. Clean the windshield with isopropyl alcohol or a dedicated glass cleaner and let it dry fully, since wax or residue under the film is the main cause of lifting. Peel the paper backing, position the decal using the transfer tape as a carrier, and press from the center outward with a squeegee or the edge of a card. Work air toward the nearest edge rather than trying to force it through the vinyl. Once the decal is down, peel the transfer tape slowly at a shallow angle. Keep the bike out of direct sun and avoid washing for the first day while the adhesive sets.

What you get

• Gloss Cast Vinyl with a smooth, light-catching surface that blends with windshield glass
• Contour cut to the artwork with no clear border or background film
• Four decal sizes: 4, 8, 12 or 18 inch widths to fit different shields
• Ships pre-masked with transfer tape for straightforward dry application
• Matte, gloss, static cling and clear finishes available across our decal line
• Printed and cut to order in our US
• Wipes clean with a soft cloth and mild cleaner

Specifications

Frequently asked questions

Will the decal block my view through the windshield?

Placement is up to you. Many riders position the decal low on the shield or in a corner so the sight line stays clear. The 4 and 8 inch sizes are easier to place outside your main viewing area than the larger cuts.

Can I remove the decal later without damaging the windshield?

Yes. Warm the decal gently with a hair dryer on low and peel it at a shallow angle. Any remaining adhesive can be cleaned off with isopropyl alcohol on a soft cloth.

Which size should I choose for my bike?

Measure the flat area of your windshield where you want the logo, leaving space at the edges. A good rule is to choose a decal width no more than half your shield width for a balanced look. If you are between sizes, the smaller option is usually safer for placement flexibility.