Crevalle Jack Boat Decals for Hull Sides

Crevalle Jack Boat Decals for Outriggers & Hull Sides

A set of crevalle jack fish decals for boats, printed on cast vinyl in your choice of matte, gloss, clear or static cling finish. Made for anglers and offshore boaters who want a clean, saltwater-ready fish graphic on the hull or outrigger.

Free shippingUSA: 5-7 days. International: 10-12 days.

Four finishesMatte, gloss, static cling or clear vinyl.

Made to orderNo returns for change of mind. Damaged orders are refunded or replaced.

Custom artworkUpload a sketch, logo or photo before adding to cart.

Size

Clear

Have your own design? Optional

Upload a logo, sketch or photo

JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.

Description

A Golden Silver Crevalle Jack Decal Built for Offshore Boats

The crevalle jack is one of the hardest-fighting fish in coastal water, and this decal set captures its deep body, forked tail and golden-silver flash in a clean, detailed graphic. Each set includes mirrored left- and right-facing fish so you can dress both sides of your hull, transom or outrigger with a balanced look. We print these boat decals on cast vinyl, which conforms to curved gelcoat surfaces without lifting at the edges. Choose a width from 12 to 48 inches to match your boat's scale, from a small skiff to a serious offshore center console. The artwork is rendered with fine detail in the fins and scales, so the fish reads clearly from the dock or across the marina.

Four Finishes and Four Widths to Match Your Rig

Every boat is different, so we offer these crevalle jack decals in the finishes our marine customers actually ask for. Matte cuts glare on bright days and blends into painted hulls. Gloss adds depth and makes the golden-silver tones pop against white gelcoat. Clear finish keeps the graphic light and subtle. Static cling gives you a removable option for rented boats, charters or leased slips, since it peels off clean with no adhesive residue. Widths run from 12 inches up to 48 inches, so you can size a pair for outrigger tips, a single statement fish for the transom, or matching sets for both hull sides. If you run a charter operation, static cling also lets you swap graphics between seasons.

Applying Vinyl Fish Decals to Gelcoat and Painted Hulls

Application is a straightforward dry or wet install, and everything you need besides a squeegee is already on your boat. Start with a clean, wax-free surface, washed with soap and water, then wiped with isopropyl alcohol to remove any release agents or polish. Position the decal with masking tape hinges before removing the liner, then squeegee from the center outward to push out air and water. Work in shade when the hull is cool to the touch, not in direct sun after a morning on the water. For curved sections near the chine or transom corners, a little heat from a hair dryer helps the cast vinyl stretch and settle. Full illustrated instructions ship with every set.

Why Anglers Order Our Boat Decals in Pairs

A single fish decal looks good, but a mirrored pair looks intentional. Most customers order the same width for both sides of the hull, or mix sizes, running a larger pair on the hull and smaller fish on the outriggers or bait station. Because we print each set to order rather than pulling stock from a shelf, the colors stay consistent across every fish in your order, even if you add more later. These crevalle jack graphics also pair well with other inshore and offshore species from our marine collection, so you can build a hull-side spread that tells the story of your season. Every decal is cut with smooth, weeded edges, ready to apply right out of the tube.

What you get

Set includes mirrored left- and right-facing crevalle jack decals
Available in 12", 18", 24", 30", 36" and 48" widths
Printed on cast vinyl that conforms to curved gelcoat and painted surfaces
Choose matte, gloss, clear or static cling finish
Static cling option removes clean with no adhesive residue
Printed to order so colors match across every decal in your set
Illustrated application instructions included with every order

Specifications

Material	Cast vinyl (static cling finish is a cling film, no adhesive)
Finish	Matte, gloss, clear or static cling
Application	Hull sides, transom, outriggers, bait station, windows; dry or wet install on clean wax-free gelcoat or paint
Set contents	Two mirrored crevalle jack decals (one left-facing, one right-facing) at selected width

Frequently asked questions

Do these decals hold up to saltwater and washing?

Yes. The vinyl and inks we use are chosen for marine use, and the decals can be washed with mild soap and water. Avoid high-pressure spray directly at the decal edges and avoid abrasive cleaners or stiff brushes over the graphic.

What width should I choose for my boat?

A common approach is one inch of decal width per foot of boat length for hull-side fish, so a 24" pair suits a boat in the 20-24 foot range. Smaller widths like 12" or 18" work well on outriggers, bait stations or smaller vessels. When in doubt, measure your flat hull area with tape before ordering.

Can I remove the decals later?

Yes. Warm the decal with a hair dryer and peel it back slowly at a low angle; any remaining adhesive can be cleaned off with isopropyl alcohol. The static cling finish is the easiest option if you want to remove and reposition the decals often, since it uses no adhesive at all.