American Flag Flame Decals for Motorcycles | Set

Description

A set of flame decals styled with an American flag design, cut for motorcycle tanks, fairings and saddlebags. Made for riders who want a bold patriotic look without paint work.

Flame Decals Built for Tank and Fairing Coverage

This American flag flame set is designed around the flowing shapes riders expect from flame decals, with tapered tongues that work along a tank line, across a fairing or down a saddlebag edge. Each set is cut as a matched pair so both sides of the bike can carry the same layout, and the flag stripes follow the flame contours rather than sitting behind them. The design reads clean from a few feet away, which is where most people actually see a bike at a stoplight or a show. Because the set comes in a range of widths from 12 to 48 inches, you can scale the flames to a small tank or stretch them across a full touring body panel.

Matte, Gloss and Clear Finish Options

Every set is printed on cast or calendered vinyl depending on the finish you choose, and you can pick the surface that matches your bike. Matte gives a low-sheen look that sits close to flat paint and works well on darker tanks. Gloss adds depth and catches light the way clear coat does. Clear and static cling options are also available if you want the flag flames to appear painted directly on the surface or prefer a removable application. Whichever finish you pick, the decal is printed in full color with contour cutting, so the flame edges stay crisp instead of boxed inside a visible border.

Applying the Set on Curved Surfaces

Motorcycle panels curve more than car doors, so take your time with placement. Clean the surface with isopropyl alcohol and let it dry fully before starting. Position each flame dry first, holding it in place to check the flow against your body lines, then use the hinge method to apply one half at a time. Work from the center of each flame outward with a squeegee or soft card to push air toward the edges. On tighter curves near tank knees or fairing vents, a little heat from a hair dryer softens the vinyl so it stretches into the contour without wrinkling. Avoid riding in rain for the first day after application.

Choosing Your Width and Layout

Measure the panel you want to cover before ordering. A 12 to 18 inch width suits a small tank or helmet, 24 to 30 inches fits most mid-size tanks and side covers, and 36 to 48 inches works for touring fairings, bags or a full tank-and-panel run. The set includes mirrored left and right pieces so the flames trail in the same direction on both sides, plus small accent flames you can place on fenders or mirrors. If you are layering the flames over an existing graphic, order the clear finish so the background stays visible and the flag flames blend into your current design.

What you get

• American flag flame design cut as a matched left and right set
• Available in 12, 18, 24, 30, 36, 42 and 48 inch widths
• Printed on cast or calendered vinyl in full color with contour cutting
• Choose matte, gloss, clear or static cling finish
• Includes accent flame pieces for fenders, mirrors or side covers
• Mirrored layout so both sides of the bike match
• Application tape and backing included, ready to position dry

Specifications

Frequently asked questions

Will these flame decals fit my tank?

The set comes in widths from 12 to 48 inches, so measure the length of the area you want to cover and choose the closest width. On curved tanks, the flames can be gently heated during application so the vinyl follows the contour.

Which finish looks most like paint?

Matte sits closest to flat or matte paint, while gloss reads like a clear-coated surface. Clear is best if you want the flames to appear printed directly on the panel or layered over existing graphics.

Can I remove the decals later?

Yes. Warm the vinyl with a hair dryer and peel slowly from one edge. Any remaining adhesive can be cleaned with isopropyl alcohol. Static cling versions remove without adhesive residue.