Off-Road Hood Decal for Jeep Gladiator | Jeep Decals

Description

A Off-Road hood decal set designed for the Jeep Gladiator hood, cut to size options from 12 to 48 inches wide. For Gladiator owners who want a rugged, factory-inspired look without paying factory prices.

Off-Road Hood Decal Built for the Jeep Gladiator

This Off-Road hood decal set is made specifically for the Jeep Gladiator, cut to follow the proportions of the Gladiator hood so it sits cleanly on the flat center section. The classic Off-Road lettering is a badge of capability that off-road trucks earn, and this decal set lets you display it in your choice of finish and width. Whether your Gladiator is a daily driver, a weekend trail rig, or a show build, this is one of the simplest jeep decals to install and one of the most visible. Each set is printed to order in our US shop on cast vinyl, so the lettering stays crisp and the edges lay flat instead of lifting at the corners.

Choose Your Size and Finish

Every hood is used differently, so this decal set comes in width options from 12 inches up to 48 inches. A smaller set works well if you want a subtle accent near the hood scoop area, while the larger widths fill the hood with the full Off-Road layout for a bolder statement. Before ordering, measure the flat area of your Gladiator hood where you plan to place the decal and choose the width that fits inside those lines with a little breathing room on each side. You can pick a matte finish for a low-profile, painted-on look, a gloss finish that stands out against flat paint, or a clear option if you want the lettering to read subtly against the hood color.

Easy Installation on Your Truck Hood

You do not need a shop to install this decal set. Clean the hood with isopropyl alcohol and let it dry completely, then position the decal using the premask application layer as a hinge. Peel the backing a section at a time and squeegee from the center outward to push air out as you go. The cast vinyl conforms to the gentle contours of the Gladiator hood, and the adhesive grabs firmly once pressed down. On a dry day above about 60 degrees Fahrenheit, most customers finish the job in under an hour with nothing more than a squeegee or credit card and a little patience. Warm the decal slightly with a hair dryer if you need extra flex around edges.

Care, Removal, and Everyday Durability

Once installed, this decal set is printed on vinyl designed for normal driving conditions including sun, rain, and car washes. Wash around it as you would the rest of the hood, and avoid high-pressure sprayers pointed directly at the edges. The matte and gloss finishes are stocked options, and the clear option keeps the lettering readable while staying discreet. When you are ready for a change, warm the decal with a hair dryer or heat gun on a low setting and peel it up slowly; the cast vinyl typically removes in one piece from factory paint. If any adhesive remains, a little isopropyl alcohol on a microfiber cloth cleans it off.

What you get

• Cut for the Jeep Gladiator hood with width options from 12 to 48 inches
• Printed to order in our US shop on cast vinyl
• Available in matte, gloss, and clear finishes
• Premask application layer for easier one-person installation
• Removable with heat from factory paint without leaving residue
• Sold as a complete left-and-right style set sized to your chosen width
• Classic Off-Road lettering in a clean, factory-inspired layout

Specifications

Frequently asked questions

Will this decal fit my Jeep Gladiator hood?

The decal set is sized for the Jeep Gladiator hood and comes in widths from 12 to 48 inches. Measure the flat area of your hood where you want the decal to sit and choose the width that fits within that space. Not affiliated with or endorsed by the manufacturer.

Which finish should I choose?

Matte gives a low-profile, painted-on look that blends with flat or textured paint. Gloss stands out and adds shine. Clear keeps the lettering subtle against your hood color. All three are printed on cast vinyl that conforms to the hood surface.

Can I remove the decal later without damaging my paint?

Yes. Warm the decal with a hair dryer or heat gun on a low setting and peel it up slowly. The cast vinyl removes from factory paint in one piece, and any leftover adhesive cleans off with isopropyl alcohol.