Off-Road Side Stripe Decals for Jeep Gladiator Trucks

Description

A set of Off-Road side stripe decals sized for Jeep Gladiator doors and body panels. Cut from cast vinyl in your choice of matte, gloss, clear or static cling finish.

Side Stripe Decals for Your Jeep Gladiator

These Off-Road side stripe decals are designed to run along the doors and lower body of a Jeep Gladiator, giving your truck a trail-ready look without the cost of a full wrap. Each set is cut to order in widths from 12 to 48 inches, so you can choose a subtle accent stripe or a wide panel graphic that fills the side of the cab and bed. The lettering and stripe layout follow the classic Off-Road theme that pairs naturally with the Gladiator's boxy silhouette. Whether you run a stock daily driver or a lifted trail rig, this is an easy weekend upgrade you can apply with basic tools in your driveway. Not affiliated with or endorsed by the manufacturer.

Choose Your Finish and Width

Every set is printed on your choice of cast vinyl in matte black, gloss black, clear, or static cling. Matte is the popular pick for a low-profile, factory-adjacent look that hides dust and water spots on the trail. Gloss gives the stripe a clean, painted-on shine. Clear vinyl lets your paint color show through the lettering for a subtle tone-on-tone effect. Static cling installs with no adhesive at all, so you can reposition or remove it whenever you like, which is handy if you lease your truck or share it in the family. Width options run from 12 to 48 inches, and the stripe scales proportionally so the lettering stays balanced at every size.

How Installation Works

Application is a dry or wet install using the transfer film we include with every set. Start by cleaning the door and body panels with isopropyl alcohol and letting them dry completely. Peel the backing, position the stripe using the door lines as your guide, and squeegee from the center outward to lock it down. On a warm, dry day above about 60 degrees Fahrenheit, the vinyl conforms easily around body lines and door handles. Static cling skips the squeegee step entirely: just press it onto clean glass or smooth paint and smooth out any air with your fingers. Full illustrated instructions ship in the box, and a plastic applicator is included so you do not need to source one separately.

Built for Daily Drivers and Trail Trucks

We print these decals in our US shop on cast vinyl, the same flexible film used for vehicle graphics, so the material stretches around curves instead of fighting them. The inks and laminate hold up to washes, rain, and sun without cracking at the edges. When you are ready for a change, warm the vinyl with a hair dryer and peel it away in one piece, leaving minimal residue you can clean off with adhesive remover. If you are building out a full theme, this stripe set pairs well with other graphics in our Jeep Gladiator decals collection, including hood decals and tailgate lettering in matching finishes. Order the width that matches your look and we cut and ship your set promptly.

What you get

• Sold as a set covering both sides of the vehicle
• Width options from 12 to 48 inches
• Available in matte, gloss, clear, and static cling finishes
• Printed on cast vinyl that conforms to body lines and curves
• Includes transfer film, applicator, and illustrated instructions
• Cut and printed in our US shop after you order
• Removable with heat when you want a change

Specifications

Frequently asked questions

Will these decals fit my Jeep Gladiator?

The stripe layout is sized for the Gladiator's doors and lower body panels. Choose your width based on how much of the side you want to cover. Not affiliated with or endorsed by the manufacturer.

Which finish should I choose?

Matte black is the most popular for a low-key trail look, gloss adds shine, clear gives a tone-on-tone effect over your paint color, and static cling is best if you want a no-adhesive, removable option.

Can I remove the decals later?

Yes. Warm the vinyl with a hair dryer and peel it off slowly. Any remaining residue can be cleaned with a mild adhesive remover. Static cling peels off with no residue at all.