Jeep Cherokee Side Stripe Decals Pair, Matte Vinyl Pair

Description

A pair of side stripe decals cut for Jeep Cherokee doors and body panels. Choose your width from 12 to 48 inches to match the look you want.

Side Stripes Made for Jeep Cherokee Body Panels

This decal pair is cut with the Jeep Cherokee's door and quarter panel lines in mind, so the stripes follow the vehicle's shape instead of fighting it. Each order includes one stripe for the driver side and one for the passenger side, so the layout stays balanced from curb to curb. Because we cut each set after you order, you can pick the width that suits your build, from a subtle 12-inch accent to a full 48-inch sweep. The stripes arrive ready to apply with transfer tape in place, so you are positioning one piece per side rather than juggling loose vinyl. Browse our Jeep Cherokee decals collection for matching hood and tailgate graphics if you want a coordinated look.

Choose Your Width and Finish

Width is the biggest styling decision with side stripes. A 12 to 18 inch set sits close to the door handles and reads as a clean accent. Moving up to 24 or 30 inches lets the stripe stretch across the door and into the front fender, which works well on two-tone paint. The 36 and 48 inch options cover more of the body line and create the classic racing stripe feel. Finish is the other choice: matte vinyl blends into flat or low-gloss paint, gloss adds shine that pops against clear coat, clear vinyl shows only the cut line, and static cling lets you test placement without adhesive. Every option is printed on cast or calendered vinyl in our shop.

Applying Your Stripe Pair

Start with a clean, dry surface, because wax and dust are the main reasons decals lift at the edges. Wash the panels, wipe them down with isopropyl alcohol, and let them dry fully. Warm the vinyl slightly with a hair dryer if the air is cool, then position each stripe using the transfer tape as a carrier. Squeegee from the center outward to push air toward the edges, and pull the tape back slowly at a low angle. Full adhesion builds over the first day or two, so avoid pressure washing directly on the edges during that period. If you picked static cling, just press it on and reposition as needed.

Care, Removal, and Ordering

Once applied, the stripes handle normal washing and weather. Hand washing is gentler than automated brushes, and keeping direct pressure-washer spray off the edges helps them stay down. When you are ready for a change, warm the vinyl with a hair dryer and peel it back slowly; the adhesive is designed to come off in one piece rather than shredding. Any residue cleans up with adhesive remover and a microfiber cloth. Each set is cut to order in our shop, so double-check your width choice at checkout. If you are pairing these with other Jeep Cherokee decals, ordering them together keeps the finish and color consistent across the whole set.

What you get

• Sold as a matched pair, one stripe per side
• Width options from 12 to 48 inches
• Available in matte, gloss, clear, and static cling finishes
• Cut from cast or calendered vinyl in our shop
• Arrives pre-masked with transfer tape for one-piece application
• Contoured cut to follow Jeep Cherokee body lines
• Removable with heat without shredding

Specifications

Frequently asked questions

Will these stripes fit my Jeep Cherokee?

The pair is cut with Jeep Cherokee door and body panel lines in mind, and the width options let you match the coverage to your build. Not affiliated with or endorsed by the manufacturer.

Which width should I choose?

Smaller widths like 12 to 18 inches work as accents near the door handles, while 36 and 48 inch options create a longer racing-style sweep. Pick based on how much of the body line you want to cover.

Can I take the stripes off later?

Yes. Warm the vinyl with a hair dryer and peel it back slowly. It is designed to remove in one piece, and any leftover adhesive cleans off with adhesive remover.