By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A mountain-themed vinyl decal kit designed for Jeep Cherokee owners who want an off-road look on their doors, hood or rear panel. Choose your set width from 12 to 48 inches.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This decal kit pairs a rugged mountain silhouette with Off-Road lettering, built for Jeep Cherokee owners who spend weekends on dirt roads and want their rig to show it. The layered mountain peaks and clean typography work as a single graphic, so you get a coordinated off-road look instead of piecing together separate stickers. It fits naturally on the hood, doors, rear quarter panel or tailgate, and the width options let you scale the design to the space you have. Whether you run a lifted trail build or a stock daily driver, this kit adds trail character without permanent paint work. Not affiliated with or endorsed by the manufacturer.
Every set is printed to order in our shop on your choice of matte, gloss, clear or static cling vinyl. Matte blends into flat paint and reads like a factory-applied graphic; gloss adds contrast and pops against flat or low-gloss paintwork; clear lets the mountain outline float over your body color; static cling gives you a temporary option that peels off clean when you want a change. Widths run from 12 inches up to 48 inches, measured across the widest point of the full kit graphic. Pick a smaller width for a door or fender accent, or go wide for a full hood or tailgate statement piece.
We print this kit on cast vinyl, the conformable film that handles the curves, body lines and panel gaps of a modern SUV better than stiffer calendered material. The matte and gloss versions use an adhesive-backed film for mounting, while static cling mounts without adhesive for short-term display. Inks are laid down with our standard printing process so the mountain tones look sharp right off the sheet. There is no clear coat or lamination required after install, and the printed surface wipes clean with mild soap and water.
Each kit ships with the graphic pre-masked and laid out in sections so you can position the mountain and lettering together or split them across panels. Start with a clean, wax-free surface at moderate room temperature, use the hinge method to align the graphic, and squeegee from the center outward to push out air. Detailed step-by-step instructions are included in the package. Take your time on hood contours and door handle areas, and the film will conform without lifting. If you need to reposition during install, the material can be lifted and reset before you apply final pressure.
The kit is designed as a Jeep Cherokee graphic and works on the hood, doors, tailgate and rear quarter panels. Because widths range from 12 to 48 inches, measure your intended panel first and choose the size that fits with margin on each side. Not affiliated with or endorsed by the manufacturer.
The matte, gloss and clear vinyl versions use an outdoor-rated adhesive intended to hold through washing and weather exposure. Avoid high-pressure sprays directly at the edges for the first day or two after installation. The static cling version is temporary and should be removed before automated washes.
Yes. Warm the graphic with a hair dryer or heat gun on low, peel slowly at an angle, and clean off any adhesive residue with isopropyl alcohol. Static cling simply peels off with no residue at all.
12", 18", 24", 36", 48"
Your shopping cart is empty
Notifications
