Fork Guard Decal Set | MX Graphics Kit for Dirt Bikes

Description

A printed fork guard decal set that lets you refresh the front of your dirt bike without a full wrap. Choose your width from 12 to 48 inches to match your guards.

Fork Guard Decals That Complete Your MX Graphics Kit

The front forks take a beating: roost, mud, brush, and pressure washers all work on that area every single ride. This fork guard decal set is printed to order in our shop and sized to fit the guards you already run, with widths available from 12 to 48 inches so you can match short USD guards or tall full-coverage plastic. Many riders pair it with an existing mx graphics kit to tie the front end into the rest of the bike, while others use it on its own to cover scuffed guards without buying a full wrap. Each set is cut fresh after you order, so what arrives is a clean, untrimmed sheet set ready for you to lay down.

Matte, Gloss, Static Cling and Clear Finish Options

Every set is printed on professional-grade cast or calendered vinyl, and you choose the finish when you order. Matte cuts glare under bright sun and hides small scuffs well, which is why many off-road riders pick it. Gloss gives the look of factory plastic and pops against dark guards. Static cling is the pick if you want a no-adhesive option you can reposition or remove in seconds, ideal for race-day looks or quick changes. Clear vinyl works when you want printed artwork that lets the guard color show through. Whichever you choose, the print is applied before the finish, so the artwork sits under the surface rather than on top of it.

How to Size Your Set and Prep the Guards

Measure the flat face of each fork guard at its widest point before ordering, and pick the width option that meets or slightly exceeds that measurement. Trimming to final shape is done at installation with a fresh blade, which gives a cleaner edge than any pre-cut guess. Start with clean guards: wash off mud and chain lube, then wipe the surface with isopropyl alcohol and let it dry fully. Work in a warm room or let the guards sit in the sun so the vinyl conforms around curves. Apply from the center outward, squeegee as you go, and make relief cuts where the plastic wraps. Let the set sit 24 hours before riding or washing.

Why Riders Order Fork Decals Separately

Fork guards are usually the first plastic to look tired, and they are also the cheapest to replace, which means a full kit can outlive the front end by a season or more. Ordering this set on its own lets you keep the rest of your bike looking matched after new guards go on, or test a color scheme before committing to a full wrap. It is also a practical option for practice bikes, spare sets of guards, and bikes shared between riders. Because we print each set after you order, artwork stays crisp and you are not buying old stock that has been sitting in a warehouse losing tack.

What you get

• Printed fork guard decal set sold as a left and right pair
• Width options from 12 to 48 inches to fit a range of guard sizes
• Available in matte, gloss, static cling, and clear finishes
• Printed on cast or calendered vinyl with artwork printed under the finish
• Cut to order after purchase, not pulled from old inventory
• Trim-to-fit application with a standard blade at install time
• Designed for riders refreshing guards without a full graphics wrap

Specifications

Frequently asked questions

How do I choose the right width for my fork guards?

Measure the widest flat area of one guard and choose the width option that is equal to or slightly larger than that measurement. You trim the decal to its final shape during installation, so a little extra material is easier to work with than too little.

Will these fit my specific bike model?

These are trim-to-fit decals, not model-specific pre-cuts, so no exact fitment is guaranteed for any particular bike. As long as your guards fall within the 12 to 48 inch width range, you can cut the set to match their shape.

Which finish should I pick for muddy off-road riding?

Matte is a common choice for off-road and woods riders because it reduces glare and hides light scuffing. Static cling is best if you want a removable option, while gloss and clear are popular for motocross and track bikes.