Bebe a Bordo Baby On Board Sticker, Spanish, Set of 2

Description

This two-piece bebe a bordo sticker set is a Spanish language baby on board window sign for family vehicles. The static cling vinyl applies without adhesive and is made for parents who want a clear message on the road. It sits alongside the other baby on board sign collection in the shop.

A Spanish Baby On Board Sign for Your Family Car

This bebe a bordo sticker set includes two matching window signs printed in Spanish, designed for the rear window or side glass of a family car. Each piece is cut from static cling vinyl, so it holds to smooth glass without any adhesive underneath. The lettering is large and easy to read at a glance, letting drivers behind you know a baby is riding along. Because you receive two signs, you can place one on each side of the vehicle, keep a spare for a second car, or replace one if it ever gets damaged. It is a simple way to share an important message with everyone on the road, in the language your family speaks every day.

Choosing Between 8, 12, and 18 Inch Sizes

The bebe a bordo sticker comes in three size options, so you can match the sign to your vehicle and your glass. The 8 inch size works well on smaller rear windows, sedan side glass, or compact cars where space is limited. The 12 inch option is a balanced middle choice that reads clearly from a normal following distance on most sedans, hatchbacks, and minivans. The 18 inch size suits trucks, SUVs, and vans with large rear windows where a bigger sign stays proportional and stands out. Measure your glass before ordering, and remember that both pieces in the set are the same size, so a larger option gives you two high-visibility signs for bigger vehicles.

Applying Your Static Cling Window Sign

Application takes only a few minutes with no tools beyond a spray bottle and a soft cloth. Start by cleaning the glass so dust and grime do not get trapped under the sign. Lightly mist the window with water, then press the decal onto the wet surface and smooth it outward from the center with your fingers or a squeegee to push air bubbles to the edge. Because the material is static cling vinyl, you can reposition it during install until the placement looks right, then let it dry. Avoid folding the decal, and keep it flat until you are ready to apply. With a little care, both pieces go on smooth and clear.

Caring for the Sign and Removing It Later

Day to day, the sign needs almost no attention. Wash around it gently by hand rather than running a pressure washer or automated brush directly over the decal, since heavy agitation can lift the edges. When you no longer need the sign, it peels off cleanly by lifting one corner and pulling slowly, leaving no residue on the glass. If you want to move it to another window or a different vehicle, remove it carefully, rinse the cling side with clean water, and let it dry before reapplying. Store any removed piece flat on its backing sheet so it stays ready for future use. Clean glass helps it cling securely.

Who This Bebe a Bordo Sticker Set Suits

This set is made for Spanish-speaking families and bilingual households across the United States who want a baby on board message in their own language. It suits new parents, grandparents who regularly transport a grandchild, caregivers, and rideshare or carpool drivers carrying infants. The two-piece format is practical for families with more than one vehicle, or for anyone who wants a backup sign on hand. If you have been looking for a bebe a bordo sticker that reads clearly, applies without adhesive, and removes without residue when the stage passes, this static cling set fits the need at $24.99.

What you get

• Set of 2 matching Spanish language bebe a bordo window signs
• Static cling vinyl holds to glass without adhesive
• Available in 8 inch, 12 inch, and 18 inch sizes
• Repositions during installation for easy placement
• Peels off cleanly with no residue left behind
• Large, easy-to-read lettering for rear or side windows

Frequently asked questions

Does this sticker use adhesive to stay on the window?

No. This bebe a bordo sticker is made from static cling vinyl, which holds to smooth glass through static rather than adhesive. That means nothing sticky touches your window, and the sign peels off cleanly whenever you want to remove or move it.

Can I move the sign to a different car later?

Yes. Remove it slowly by lifting a corner, rinse the cling side with clean water, and let it dry before reapplying to another window. Handle it gently and keep it flat, since folding or creasing the material can reduce how well it clings afterward.

Which size should I choose for my vehicle?

The 8 inch size fits compact cars and smaller windows, the 12 inch works for most sedans and minivans, and the 18 inch suits trucks, SUVs, and vans with large rear glass. Measure your window first, since both signs in the set come in the same size.

Will removing the sign leave residue on my glass?

No. Because it is static cling vinyl with no adhesive, the sign lifts off without residue. Just peel slowly from a corner. If any dust clings to the material itself, rinse it with water and let it dry flat before storing or reusing it.