By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A bathroom is the one room where steam, splash and condensation work on every surface all day, so a decal that peels in the kitchen can fail here within weeks. This collection gathers vinyl decals chosen for humid-room use: quotes and accents for painted walls above the tub, small pieces for tile su…
Showing all 2 resultsSorted by popularity
A bathroom is the one room where steam, splash and condensation work on every surface all day, so a decal that peels in the kitchen can fail here within weeks. This collection gathers vinyl decals chosen for humid-room use: quotes and accents for painted walls above the tub, small pieces for tile surrounds, and mirror-edge designs that tolerate daily fog. Whether you are decorating a rental where you cannot paint, covering dated tile in an apartment, or adding a finishing touch above a vanity, these are sized and cut for the tight dimensions of real US bathrooms.
This collection includes lettering and quotes for above the toilet and towel bar, small accent shapes for tile grids, larger statement pieces for the main wall, and mirror-frame designs. It suits renters who need removable adhesive, homeowners updating a dated bathroom without renovation, and short-term rental hosts refreshing a space between guests. If your bathroom has an exhaust fan or a window, nearly every option here works. If it is a windowless half bath with constant humidity, read the material notes below before choosing, because adhesive performance differs more than artwork does.
Most pieces in this collection are cut from matte or gloss calendered vinyl, a workhorse permanent adhesive vinyl that holds up well to intermittent moisture and steam. Larger wall graphics use cast vinyl, which conforms to slight surface texture and resists shrinking at the edges in warm rooms. Removable options use a lower-tack adhesive on an air-release liner, so you can reposition during install and peel it off later without pulling paint.
Finishes available include matte for a painted look, gloss for a tile-adjacent shine, and a gloss laminate layer that adds a wipeable surface over printed designs.
Measure before ordering, because bathroom walls are smaller than they feel. Standard guidance for this collection:
For walls with heavy orange-peel texture, go smaller. Large decals bridge texture peaks and lose contact at the edges, while small pieces conform better.
Step 1. Clean the surface with isopropyl alcohol and let it dry fully. Skip glass cleaner on tile and paint, since ammonia residue weakens adhesive.
Step 2. Wait for a dry day or run the exhaust fan for 30 minutes so walls are not damp to the touch.
Step 3. Position with painter's tape holding the top edge, check level, then hinge the decal down.
Step 4. Squeegee from the center outward, working air toward the edges. On air-release liners, press firmly and the channels vent trapped air on their own.
Step 5. Peel the transfer tape slowly at a sharp angle, going back over any lifted edges.
For care, wipe with a damp cloth and mild soap. Avoid abrasive scrubbers and bleach-based sprays directly on the decal, and run the fan during long hot showers for the first week while the adhesive sets.
Work through this short list before you add to cart:
Yes, with conditions. Permanent calendered vinyl tolerates steam and indirect moisture well once the adhesive has cured for about a week. Direct water contact from a showerhead spray will eventually work under the edge, so place decals above the splash line and run the exhaust fan during the first several showers.
Glossy glazed tile is one of the best surfaces for vinyl. Clean it with isopropyl alcohol first, and press every edge down firmly with a squeegee. Avoid matte or unglazed stone tile, because porous surfaces do not give the adhesive enough grip to hold through humidity swings.
Removable adhesive is designed to release cleanly from walls painted with quality paint that has cured at least 30 days. Fresh paint, flat or chalk-finish paint, and textured walls are riskier. Test a corner in a hidden spot and remove it slowly at a low angle, warming gently with a hair dryer if needed.
Wipe the mirror with isopropyl alcohol and let it dry completely so no film remains. Apply while the room is dry, before anyone showers, and squeegee from the center out. Fog condensation will not remove a cured decal, but applying over damp glass will cause lifting within days.
Most US bathrooms have 24 to 36 inches of usable width between the toilet tank and side walls, and 18 to 30 inches of height to the ceiling or shelf. A decal 18 to 30 inches wide centered on the tank fills that space without crowding. Measure your own wall, since pedestal sinks and stacked shelves change the math.
Orders ship from our US facility, and uncut-stock sizes of standard designs typically ship within a few business days, while custom-cut orders take longer for production. Shipping time varies by destination and service level, so check the listing and your confirmation email for the current estimate on your specific order.
Your shopping cart is empty
Notifications
