By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
You want your keyboard to stop looking like every other one in the coffee shop or the office. Keyboard stickers cover individual keycaps, the deck around the keys, or both, giving a laptop or mechanical board a custom look without replacing anything.
Showing all 7 resultsSorted by popularity
You want your keyboard to stop looking like every other one in the coffee shop or the office. Keyboard stickers cover individual keycaps, the deck around the keys, or both, giving a laptop or mechanical board a custom look without replacing anything. Each decal is cut to fit standard key sizes, so you get full coverage with the legends and edges still visible where you need them. The removable adhesive holds through daily typing but peels off cleanly when you change setups or sell the machine. This collection covers keytop sets, deck skins, and accent decals sized for common US keyboard layouts.
Keyboard stickers fall into three groups in this collection. Keytop sets include one decal per key, cut to standard cap widths. Deck skins cover the flat area surrounding the keyboard, including the trackpad on most laptops. Accent decals are small single stickers placed between or beside keys. These suit students, remote workers, gamers, and anyone restoring a worn or yellowed keyboard without buying replacement caps. Most sets are designed for US ANSI layouts, so check your layout before ordering if you use ISO or a compact 60 percent board.
Most keytop stickers are printed on thin calendered vinyl, typically 3 to 4 mil, because thick film can catch fingernails while typing. Deck skins work well in cast vinyl, which conforms around slight curves near the palm rest. Calendered vinyl is a solid choice for flat accent decals where conformability matters less. A gloss laminate protects printed designs from fingertip oils, while a matte laminate cuts glare under desk lighting. Static cling and clear finishes are available for accent pieces but are not recommended on keytops you type on constantly, since the texture wears faster. Air-release liners on larger deck skins help push out bubbles during application.
Measure before ordering. A standard US letter keycap measures about 0.75 inches wide by 0.75 inches tall, and keytop decals are cut slightly smaller, around 0.7 inches, so edges do not lift at the corners. Spacebar decals for a standard layout run about 6.25 inches wide. Laptop deck skins vary by model: a 13 inch laptop deck is roughly 11.5 by 4.5 inches of usable flat area around the keys, while a 15 inch model offers closer to 13 by 5 inches. Trackpad decals are cut about 0.25 inches undersize on each side to avoid interfering with edge swipe gestures. For mechanical keyboards, measure one of each key width rather than assuming a standard kit will fit, since 60, 75, and TKL boards use different cap sizes.
Step 1: Power down and unplug the keyboard. Clean each keycap and the deck with isopropyl alcohol and a lint-free cloth, then let it dry fully. Step 2: Work in a dust-free room and handle decals by the backing, not the adhesive side. Step 3: For keytops, align one edge first, lower the decal, and press from center outward with a fingertip. Step 4: For deck skins, peel a corner, align along the top row of keys, and work down slowly, using a squeegee or card wrapped in cloth. If bubbles appear on a deck skin with an air-release liner, press them toward the nearest edge. Step 5: Wait 24 hours before heavy typing so the adhesive sets. For care, wipe with a slightly damp cloth. Avoid solvents on printed finishes. To remove, peel slowly at a low angle; warm the decal briefly with a hairdryer on low if it resists.
No, when removed correctly. These decals use removable adhesive engineered to release cleanly from plastic keycaps and laptop decks. Peel slowly at a low angle, and warm stubborn pieces with a hairdryer on low heat. If any adhesive remains, a small amount of isopropyl alcohol on a lint-free cloth removes it without damaging the surface.
Keytop decals are cut from thin 3 to 4 mil vinyl, which is thin enough that most typists notice little to no change. If you type heavily or game competitively, apply decals to less-used keys or use deck and accent stickers instead. Matte laminate has a slightly more textured feel than gloss.
It depends on your layout. Most sets target standard US ANSI keycap sizes, so 60 percent, 75 percent, and TKL boards may need trimming or a custom order. Measure one of each keycap width in inches before ordering. For unusual layouts, contact us with your measurements and we can check fit.
For keytop sets, yes. Decals are printed with the legends, or cut transparent over them, depending on the design. Deck skins and accent decals do not cover keycaps at all. Check each product listing to confirm whether the design includes printed legends for your layout.
With normal use, printed keytop decals with a laminate layer typically hold up for months to a couple of years, depending on how often you type. Keys you strike hardest, like the spacebar and home row, show wear first. Deck skins usually outlast keytops since they receive less direct contact.
Yes, we ship from the US to all 50 states. Small-format sticker orders ship in a rigid mailer to prevent bending. Delivery takes 5 to 7 days in the United States and 10 to 12 days internationally.
Your shopping cart is empty
Notifications
