Tailgate Stripe Decal Kit for Chevrolet Tahoe

Description

A vinyl stripe decal kit sized and shaped for the tailgate of a Chevrolet Tahoe. For owners who want a clean, layered racing-stripe look without paint or permanent body work.

A Tailgate Stripe Kit Cut for the Chevrolet Tahoe

This decal kit is designed around the tailgate proportions of the Chevrolet Tahoe, so the stripe layout reads as a deliberate design choice rather than a generic strip slapped on the back. The set includes a matched group of parallel stripes that follow the width of the tailgate, giving your SUV a layered, performance-inspired look in a single afternoon. Choose the size that fits your build: 4, 8, 12 or 18 inch stripe heights. Smaller sizes create a subtle accent above the bumper line, while the larger options make a bolder statement across the whole tailgate. Not affiliated with or endorsed by the manufacturer.

Cast Vinyl Built for Outdoor Use

Each stripe is printed on Cast Vinyl, the conformable material we use for applications that need to follow gentle body curves and hold up through daily driving. The vinyl is laminated for abrasion resistance, so car washes, road grime and sunlight do not quickly wear down the print. You pick the surface look: a matte finish for a low-key, almost painted appearance, a gloss finish that pops against factory paint, or a clear finish that lets your Tahoe's paint color show through the stripe design. Static cling is also available if you want a temporary look you can reposition or remove at any time.

Chevrolet Decals for Tailgate Areas, Installed Step by Step

Installation is a wet-apply process, which means you spray the tailgate and the adhesive side of each stripe with a slip solution before placing it. That gives you time to slide the decal into position, squeegee out the liquid, and let it bond. The kit ships with application tape holding the stripe spacing, so the gaps between stripes stay even without measuring each one. Full instructions walk you through cleaning the surface, aligning the kit to the tailgate, and finishing the edges. Most buyers complete the job in under an hour with a squeegee, spray bottle and a little patience.

Sizing, Care and Ordering

Pick your stripe height at checkout: 4, 8, 12 or 18 inches. If you are covering the full tailgate on a Tahoe, the 12 and 18 inch kits give the most coverage, while 4 and 8 inch kits sit as an accent band. Before applying, wash the tailgate and remove any wax so the adhesive bonds directly to paint. After installation, avoid pressure washing the stripe edges for the first few days. To remove the decal later, warm it with a hair dryer and peel it away slowly. Priced within the typical range for tailgate stripe kits, with free shipping on US orders.

What you get

• Stripe layout sized for the Chevrolet Tahoe tailgate
• Available in 4, 8, 12 or 18 inch stripe heights
• Printed on Cast Vinyl with a protective laminate
• Choose matte, gloss, clear or static cling finish
• Wet-apply installation with pre-spaced application tape
• Includes step-by-step printed instructions
• Removable with heat when you want a change

Specifications

Frequently asked questions

Will this kit fit my Chevrolet Tahoe?

The stripe layout is designed around the tailgate proportions of the Chevrolet Tahoe. Not affiliated with or endorsed by the manufacturer. Measure your tailgate width and compare it against the kit size you are considering before ordering.

Which size should I choose?

The 4 and 8 inch kits work as accent bands near the bumper line, while the 12 and 18 inch kits cover more of the tailgate for a bolder stripe look. Measure the vertical space you want to fill and pick the closest height.

Can I take the stripes off later?

Yes. Warm the decal with a hair dryer and peel it slowly from one edge. Any remaining adhesive can be cleaned off with a mild adhesive remover. Static cling versions can be peeled off and reapplied at any time.