Ram Truck Tailgate Decal Pair Gloss Vinyl Set

Description

A pair of gloss Cast Vinyl tailgate decals sized to your truck, cut and ready to apply. Made for Ram owners who want a clean, sharp look on the back of their truck.

Gloss Finish Tailgate Decal Pair for Ram Trucks

This two-piece decal set is cut from gloss Cast Vinyl and sized for tailgate placement on Ram and Dodge Ram 2500 trucks. The gloss surface catches light in a way that reads as a painted-on look rather than a stuck-on sticker, blending with factory paint instead of sitting on top of it. Each decal in the pair is cut to match the other, so the left and right sides of your tailgate carry the same line weight and shape. Whether you are dressing up a work truck or finishing a weekend build, the pair works as a ram truck window sticker alternative for owners who prefer the tailgate as their canvas. Choose the size that fits your layout before checkout.

Four Decal Sizes to Match Your Tailgate Layout

Every order of this pair is available in four decal sizes: 4, 8, 12 or 18 inches. The 4 inch size suits tight placements, small panel accents, or trucks where you want the Graphic to whisper rather than shout. The 8 and 12 inch options are the middle ground most tailgate layouts use, filling the space without crowding Graphic or handle recesses. The 18 inch pair makes a statement across a wide tailgate and photographs well at meets and shows. Measure your available flat space before ordering, keeping in mind curves, lettering, and camera cutouts, so the pair sits clean on both sides of the gate.

Cast Vinyl Built for Outdoor Truck Duty

We print this pair on Cast Vinyl, the conformable film that bends around gentle body contours without lifting at the edges. The gloss finish is laminated into the print, so the shine will not flake off the way coated stickers can after a season of sun. Application is a standard wet or dry install with transfer tape, which we include with every pair. Work the decal down from the center outward with a squeegee or soft card, peel the tape slowly, and you are done in minutes. The vinyl resists everyday car washes and weather, and it removes cleanly with heat when you are ready for a change.

Why Buyers Pick This Pair Over Single Decals

A matched pair costs less per decal than ordering two singles so your left and right graphics match exactly, since both pieces come from the same print run. Buyers shopping in the twenty to thirty five dollar range for tailgate graphics often receive one sheet or mismatched cuts; this listing is for two ready-to-apply decals, sized identically, in the finish and size you select. That makes it a straightforward choice for truck owners who want symmetry on the back of the vehicle. If you are building a full theme, this pair pairs naturally with other pieces from our Ram and Dodge Ram 2500 decals collection.

What you get

• Sold as a matched pair of two decals, cut from the same print run
• Gloss Cast Vinyl with a shine that reads like paint, not a sticker
• Available in 4, 8, 12 or 18 inch decal sizes
• Transfer tape included for wet or dry application
• Conforms to gentle tailgate contours without lifting at the edges
• Removes cleanly with heat when you want to change the look
• Printed in the USA by LEO Sticker

Specifications

Frequently asked questions

What size should I order for my tailgate?

Measure the flat, open space on each side of your tailgate first, avoiding Graphic, lettering, and handle recesses. The 8 and 12 inch sizes fit most tailgate layouts, while the 18 inch pair suits wide gates with room to spare. When in doubt, size down slightly so the decal clears curves and trim.

Will the gloss finish match my truck's paint?

The gloss surface reflects light similarly to clear-coated paint, so it blends in rather than sitting visibly on top. It is a Vinyl Decal, not paint, so exact color matching to your specific paint code is not something we promise. The effect is a clean, painted-on look from a normal viewing distance.

Can I take these through a car wash?

Yes, once fully applied and bonded, the Cast Vinyl holds up to normal car washes and weather. Avoid high-pressure spray directly at the decal edges for the first few days after install. If you ever want to remove the pair, warm it with a hair dryer or heat gun and peel it away slowly.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.