By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A pair of Cast Vinyl racing stripe decals cut for truck hoods, offered in 4, 8, 12 or 18 inch widths. Made for owners who want a clean dual-stripe look without paint.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This decal pair brings the classic twin racing stripe treatment to your truck hood. Each set includes two matching stripe decals, mirrored so they sit evenly on either side of the hood's centerline. The stripes are cut from Cast Vinyl that conforms to the gentle curves and body lines found on most truck hoods, so you get a smooth, painted-on appearance once installed. Whether you want a subtle accent at 4 inches or a bolder statement at 18 inches, the pair works as a matched set. It is a straightforward way to add personality to your truck without committing to a paint, and it can be removed later if you change your mind.
Every truck and every taste is different, which is why these stripes come in four widths: 4, 8, 12 or 18 inches. The 4 and 8 inch sizes are popular with owners who want a slim, understated accent stripe running up the hood. The 12 and 18 inch options create a wider, more aggressive racing look that fills more of the hood panel. Before ordering, measure the flat area of your hood between the centerline and the edges to see which width fits best. Because each stripe is a separate decal, you control the spacing between them, letting you run them tight together for a solid twin-stripe effect or spaced apart for a wider track.
We print these stripe decals in the finishes our actually runs: matte, gloss, clear and static cling. Matte gives a low-sheen, almost painted-flat look that hides glare and works well on darker trucks. Gloss has a smooth shine that reads like clear-coated paint. Clear stripes let your factory paint color show through the cut, blending the design into the body. Static cling is the no-adhesive choice, ideal if you want the look temporarily, such as for a weekend event, since it peels off clean with no residue. Whichever finish you pick, the vinyl is cut and packed here in our US.
Installation is a dry or wet application process you can do in a driveway with basic tools. Start with a clean, wax-free hood and a mild soap-and-water solution if you prefer the wet method. Peel the backing, position each stripe, and squeegee from the center outward to push out air and moisture, then remove the transfer tape. Work in moderate temperatures and keep the surface dry while the vinyl sets. Take your time aligning the first stripe, then use it as the reference for the second so the pair sits parallel. Full step-by-step instructions ship with every set, and the decals can be repositioned during the wet application stage.
Measure the flat area of your hood from the centerline toward the edges. A 4 or 8 inch stripe suits a slim accent look, while 12 or 18 inch widths create a bolder racing effect. Each stripe is applied separately, so you also control the spacing between them.
Applied to a clean, factory-cured paint surface, the vinyl removes without damaging the finish. Warm the decal gently with a hair dryer during removal and peel slowly. Static cling uses no adhesive at all and peels off clean.
Yes. Static cling has no adhesive, so you can apply it for an event or weekend and peel it away afterward. It clings best to smooth, clean surfaces and should be stored flat on its backing when not in use.
Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
