Matte Black Fender Decal Pack of 4 for Ram 1500

Description

A set of four matte black fender decals cut from Cast Vinyl, sized for truck owners who want a clean blackout look on their fenders. Choose 4, 8, 12 or 18 inch decals to match your build.

Blackout Fender Decals for Your Ram 1500

This decal pack gives your Ram 1500 a sharp, factory-inspired blackout treatment without the cost of painted or molded fender trim. Each set includes four matching decals cut from matte black Cast Vinyl, designed to lay over the fender contours of your truck bed and front quarters. The matte finish absorbs light instead of reflecting it, so the decals blend in with black plastic trim, tonneau covers and powder-coated accessories rather than standing out against them. Whether you are covering scuffs, hiding rock chips or simply finishing off a murdered-out build, this is one of the simplest upgrades you can make in your driveway with basic tools you already own.

Choose Your Decal Size: 4, 8, 12 or 18 Inches

Every truck build is different, so this pack is offered in four decal sizes: 4, 8, 12 and 18 inches. Smaller 4 and 8 inch decals work well as accent pieces near the fender lip or on front quarter panels, while the 12 and 18 inch options cover more surface area for trucks with wider flares or lifted stance. Measure the flat area of your fender before ordering and pick the size that fits inside your trim lines with a little breathing room on each edge. Because all four decals in the pack are cut to the same size, your truck gets a symmetrical look side to side and front to rear, which is exactly what makes blackout trim read as intentional rather than pieced together.

Matte Cast Vinyl Built for Daily Drivers

These decals are printed and cut on matte Cast Vinyl, a thin, conformable material that follows gentle curves without wrinkling or silvering. Cast Vinyl is the same class of material used for long-term vehicle graphics because it holds its shape and resists the cracking and fading you see on cheaper thick stickers. The matte black surface is solid opaque color, so factory paint color underneath will not ghost through, and the finish matches textured plastic trim closely enough that most people will assume it came on the truck. Application is a standard wet or dry install with transfer tape, and the decals remove cleanly with heat when you are ready for a change, leaving no adhesive residue behind.

Easy Install in Your Own Driveway

You do not need a appointment for this upgrade. Start by washing the fender area with dish soap and water, then wipe it down with isopropyl alcohol to remove any wax or residue. Position each decal with the transfer tape still intact, use a strip of masking tape as a hinge to confirm placement, then peel the backing and squeegee from the center outward. On warm days the vinyl conforms almost immediately; on cold days a hair dryer or heat gun on low helps it wrap around body lines. Total install time for all four decals is typically under an hour, and the result looks like the kind of social sticker for car styling that turns heads at every truck meet.

What you get

• Set of 4 matching matte black fender decals
• Available in 4, 8, 12 or 18 inch decal sizes
• Cut from conformable matte Cast Vinyl
• Solid opaque black that hides paint color underneath
• Applies wet or dry with included transfer tape
• Removes cleanly with heat, no residue left behind
• Installs at home with basic tools in under an hour

Specifications

Frequently asked questions

Will these decals damage my paint when I remove them?

No. Applied to factory paint in good condition, the Cast Vinyl lifts away with gentle heat from a hair dryer or heat gun. Warm the decal, peel at a shallow angle, and any remaining adhesive wipes off with isopropyl alcohol.

Which size should I order for my truck?

Measure the flat area of your fender between the trim lines and pick the decal size that fits with a small margin on each side. The 4 and 8 inch sizes suit narrow fender lips, while 12 and 18 inch decals work best on wider flares or lifted trucks.

Can I wash my truck after installing the decals?

Yes. Wait about 48 hours before washing so the adhesive fully bonds. After that, hand washing and touchless car washes are fine. Avoid high-pressure spray nozzles pointed directly at the decal edges.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.