Toyota Racing Stripes Decal Pack of 10 - Vinyl Stripe Kit

Description

A set of 10 Cast Vinyl racing stripe decals sized for cars, trucks and SUVs. Made for drivers who want classic stripe styling without paint or permanent body work.

Toyota Racing Stripes for a Classic Track Look

This decal pack gives you ten racing stripe pieces in one order, so you can dress up a hood, roof, tailgate or doors with the stripe layout you like best. Each stripe is cut from Cast Vinyl and printed in a bold, clean color line that reads as classic motorsport style. Choose the size that fits your vehicle: 4, 8, 12 or 18 inches. The stripes work on flat and gently curved panels, and because you get ten pieces, you can run a full-length pair down the body or split them across several areas. It is a simple way to add character before a car meet or weekend drive.

How to Place Your Stripes for a Clean Layout

Start with a clean, dry, wax-free surface and plan your layout with masking tape before peeling any backing. For a traditional look, run two long stripes down the center of the hood and roof, or place shorter stripes on the fenders or rear bumper as accents. Apply each stripe slowly from one end, smoothing with a squeegee or credit card to push air out as you go. Smaller 4 and 8 inch stripes work well on mirrors, door corners and spoiler faces. Larger 12 and 18 inch pieces suit hoods, quarter panels and tailgates. If you need to reposition a stripe right after placement, lift it gently and set it again before pressing it fully.

Matte, Gloss, Static Cling and Clear Options

Every stripe in this pack is offered in the finish that suits your build. Gloss delivers the shiny, painted-on look most people picture with racing stripes. Matte gives a flat, low-key appearance that works nicely on darker paint or matte-wrapped vehicles. Static cling versions go on without adhesive and peel off cleanly whenever you want a temporary look for an event. Clear finish stripes let your paint show through with a subtle outlined effect. All options are cut from quality cast or calendered vinyl, so the material conforms to body curves without lifting at the edges the way thicker films can.

Care, Removal and Reordering

Once applied, wash around the stripes by hand or with a gentle hose rinse rather than high-pressure spray aimed directly at the edges. Avoid waxing directly over the stripes; wax the surrounding paint and buff up to the edge. When you are ready for a change, warm each stripe slightly with a hair dryer on low and peel it back slowly at a shallow angle, then remove any residue with a safe adhesive remover and a microfiber cloth. If you want to extend your layout later, reorder the same size for a matching set, or mix sizes from this collection to build a custom stripe design across your whole vehicle.

What you get

• Pack of 10 racing stripe decals in one order
• Available in 4, 8, 12 or 18 inch sizes
• Cast and calendered vinyl cut for flexible application
• Finish options: matte, gloss, static cling or clear
• Suitable for hoods, roofs, doors, fenders and tailgates
• Peel-and-stick application with tape-and-smooth method
• Removable with gentle heat and slow peeling

Specifications

Frequently asked questions

How many stripes do I get and what sizes can I choose?

Each pack contains 10 racing stripe decals. At checkout you select one size per pack: 4, 8, 12 or 18 inches. Many customers order two different sizes to build a layered layout.

Will these stripes damage my paint?

Applied to a clean, factory-painted surface and removed with gentle heat and slow peeling, the adhesive stripes come off without pulling paint. Static cling finish uses no adhesive at all and lifts off by hand.

Can I use these on a curved hood or roof panel?

Yes. The vinyl is cut thin enough to conform to gently curved panels. Work slowly from one end and use a squeegee to press the stripe down as you follow the curve.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.