By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A red, white and blue stripe decal set printed on gloss Cast Vinyl, made for riders who want a patriotic look on their helmet. Choose from four decal sizes to fit your lid.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This decal set lays down a bold red, white and blue stripe treatment across the shell of your helmet, giving it a flag-inspired look without the work of a custom paint job. The gloss finish catches light the same way a clear-coated surface does, so the stripes read as part of the helmet rather than a sticker sitting on top. Each set is cut from Cast Vinyl that conforms to the gentle curves of a helmet shell, and the material is thin enough to wrap edges without lifting at the corners. Whether you ride a motorcycle, race motocross or just want your bicycle helmet to stand out at the trailhead, these stripes are a simple way to add personality before the next ride.
Every rider's helmet is a different canvas, so this set is offered in four decal sizes: 4, 8, 12 and 18 inches. Smaller sizes work well on half shells, youth helmets and tight side panels where you only have a few inches of real estate. The mid-range options fit the sides of most full-face helmets, running from the visor edge back toward the rear. The largest size is cut for riders who want a full-length stripe down the center or across both sides of a larger touring or Off-Road helmet. Measure the flat area you want to cover before ordering, and pick the size that gives you a little breathing room at the edges.
Application takes only a few minutes with basic prep. Start with a clean, dry helmet at room temperature, since dust and wax are the main reasons decals bubble or peel. Peel the backing, position the stripe where you want it, and press from the center outward with a squeegee or the edge of a credit card to push air toward the edges. The Cast Vinyl flexes as you work it, so take your time over curves and vents rather than stretching it all at once. Once everything is smooth, go back over seams and edges with firm pressure. Wait a full day before riding in rain or washing the helmet so the adhesive sets up completely.
Every set in this listing is printed and cut to order in our US, so nothing sits in a warehouse losing adhesive strength before it reaches you. We print on gloss Cast Vinyl with printed inks, which helps the reds and blues stay true through long sunny seasons instead of fading to pastel in a few months. Each order ships with application instructions and a test decal so you can practice placement before committing to the real thing. If you are building out a full patriotic theme, these stripes pair well with other helmet stickers from our, including flag decals and accent pieces in the same gloss finish for a matched look.
Yes. The set is printed on Cast Vinyl, which is the flexible grade used for contoured surfaces. Work the decal from the center outward and let it relax over curves rather than stretching it all at once.
Measure the flat area of your helmet where you want the stripe, then pick the decal size that fits within it. The 4 inch size suits small panels and youth helmets, while the 18 inch option covers full-length stripes on larger shells.
Yes. Warm the decal gently with a hair dryer and peel it away slowly at a low angle. Any leftover adhesive can be cleaned off with isopropyl alcohol once the decal is fully removed.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
