Matte Racing Stripes Decal for Toyota Trucks | LEO

Description

Matte black racing stripe decals cut from Cast Vinyl, sized for truck hoods, tailgates and toolboxes. A clean, low-sheen stripe set for Toyota truck owners who want a subtle motorsport look.

Matte Toyota Racing Stripes With a Factory-Clean Look

These toyota racing stripes bring a motorsport feel to your truck without the shine. The matte finish absorbs light instead of bouncing it back, so the stripes read as part of the paint rather than a sticker laid on top. Each set is cut from Cast Vinyl that conforms to the gentle curves of a hood, fender or tailgate panel. Whether you drive your truck to the job site or the track, the low-key stripe layout adds character while staying understated. Choose the width that matches your build, apply the pair in an afternoon, and enjoy a look that complements factory body lines instead of fighting them.

Four Stripe Widths to Match Your Truck Build

Every truck owner has a different idea of how bold their stripes should be, so this decal set comes in four sizes: 4, 8, 12 and 18 inches. The 4-inch pair sits close to a classic rally stripe layout and works well on tailgates or toolbox lids. The 8-inch set is a popular middle ground for full-hood runs. The 12 and 18-inch widths make a stronger statement across a hood or bed panel and suit lifted trucks with wide fenders. Measure the panel you plan to stripe before ordering, and remember that the listed size refers to the total stripe width of the pair as cut.

Cast Vinyl That Follows Truck Body Panels

We print and cut these stripes on Cast Vinyl, the conformable choice for vehicle applications. Cast Vinyl stretches and settles around the slight crowns and edges found on truck hoods and tailgates, which helps the stripe edges stay down instead of lifting at curves. The matte surface also hides minor dust and water spots better than a gloss finish, which matters on a working truck. Application is a standard wet or dry install with transfer tape: clean the panel, position the pair, squeegee from the center outward, and peel the carrier film. Full instructions ship with every order.

Care Tips for Long-Lasting Matte Stripes

A few simple habits keep matte vinyl looking right. Wash by hand with mild soap and a soft cloth rather than automatic brush washes, which can scuff the surface. Avoid wax directly on the stripes, since wax residue can leave uneven sheen spots on a matte finish. If an edge ever lifts, warm it gently with a hair dryer on low and press it back down with a squeegee. When you are ready for a change, warm the vinyl and peel it away slowly. Following these steps helps your stripe set stay looking as clean as the day you installed it.

What you get

• Matte finish that reads as part of the paint, not a shiny overlay
• Cut from conformable Cast Vinyl for truck hoods, tailgates and toolboxes
• Available in 4, 8, 12 or 18 inch stripe widths
• Pair layout designed to complement truck body lines
• Ships with transfer tape and step-by-step installation instructions
• Hand wash friendly, no wax needed on the matte surface
• Made to order in the USA by LEO Sticker

Specifications

Frequently asked questions

Will these stripes fit my specific truck model?

The set is sold by stripe width rather than by model, so it fits a wide range of trucks. Measure the panel you want to stripe and choose the 4, 8, 12 or 18 inch width that best matches your build.

Can I install these myself?

Yes. The pair ships on transfer tape with printed instructions. Clean the panel, position the stripes, squeegee from the center outward, and remove the carrier film. Most installs take under an hour.

Can the stripes be removed later?

Yes. Warm the vinyl with a hair dryer on low and peel it away slowly. Any remaining adhesive can be cleaned with a vinyl-safe adhesive remover.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.