Matte Black Truck Door Decal Kit | Vinyl Decal Sizes 4-18"

Description

A matte black Vinyl Decal kit made for truck doors, cut in your choice of 4, 8, 12 or 18 inch sizes. For truck owners who want a clean, low-shine blackout look without paint.

A Blackout Look for Your Truck Doors

This matte black truck door decal kit gives your doors a flat, painted-on appearance at a fraction of the cost of a visit. The matte finish absorbs light instead of reflecting it, so the decals blend in with flat black trim, bed covers and tonneau hardware. Each kit is cut from Cast Vinyl with a matte black face and a pressure-sensitive adhesive backing, so it lays down smooth and stays put through washes, rain and highway driving. Choose the size that fits your doors, clean the surface, peel and apply. No special tools or professional installer needed, just a squeegee or a soft card to press out air as you go.

How Our Door Decals Are Made

Every kit is printed and cut in our US on Cast Vinyl, a thin and flexible film that conforms to the gentle curves and body lines around truck door panels. We offer four decal sizes, 4, 8, 12 and 18 inches, so you can scale the look from a subtle accent to a full-door statement. The matte finish keeps the surface uniform under sunlight and streetlights, with no glare or hot spots. Because the vinyl is die-cut to shape, the edges stay crisp after application, and the release liner peels away cleanly. If you want to try the look before committing, our static cling and clear finishes are also available in this collection.

Applying Your Truck Door Decal Kit

Start with a clean, dry, wax-free surface. Wash the door panel, wipe it down with isopropyl alcohol and let it dry completely. Warm the decal slightly with a hair dryer if the weather is cold, which helps the film flex around contours. Peel the backing, position the decal, and press from the center outward with a squeegee or soft card to push air toward the edges. Avoid applying in direct sun or below about 50 degrees Fahrenheit, since extreme temperatures make vinyl harder to work with. Keep the truck dry for the first 24 to 48 hours while the adhesive sets. Full step-by-step instructions ship with every kit.

Removal and Care

When you are ready for a change, warm the decal with a hair dryer or heat gun on a low setting and peel it back slowly at a flat angle. Warming softens the adhesive so the vinyl comes off in one piece instead of tearing. Any leftover residue can be rolled off with your thumb or lifted with a mild adhesive remover and a microfiber cloth. For day-to-day care, hand washing is gentlest on the edges, though touchless car washes are generally fine. Skip high-pressure wands aimed directly at the decal edges, and avoid brushes, which can lift corners over time.

What you get

• Matte black Cast Vinyl with a flat, low-glare finish
• Available in 4, 8, 12 or 18 inch decal sizes
• Die-cut edges for a crisp, painted-on look
• Pressure-sensitive adhesive applies with a squeegee or soft card
• Printed and cut in our US
• Peel-and-apply installation with no professional installer needed
• Removable with heat when you want to change the look

Specifications

Frequently asked questions

Which decal size should I choose for my truck doors?

The 4 and 8 inch sizes work well as accents near handles or mirrors, while 12 and 18 inch sizes make a bolder statement across the door panel. Measure the flat area of your door before ordering to pick the size that fits best.

Will these decals damage my paint?

When removed correctly with heat and slow peeling, the vinyl and adhesive lift away without pulling paint on a factory-finish surface. Freshly painted or repainted panels should fully cure before applying any decal.

Can I use these on textured or plastic door panels?

These decals adhere best to smooth, clean surfaces. Heavily textured plastic may not hold the vinyl evenly along the edges, so test fitment on a small flat area first.