Firefighter Maltese Cross Helmet Decal Kit | Helmet Stickers

Description

A Maltese cross decal kit for firefighter helmets, turnout gear, toolboxes and windows. Printed on Cast Vinyl in your choice of matte, gloss, clear or static cling finish.

A Maltese Cross Built for the Firehouse, Not Just the Catalog Page

The Maltese cross is one of the oldest symbols in the fire service, and this decal kit puts it where it belongs: on your helmet. Each kit is cut from Cast Vinyl and printed in our, so the cross keeps clean edges and solid color instead of the fuzzy lines you get from cheap die-cut sheets. The design reads clearly at a distance, which matters when your lid is sitting on the apparatus floor or hanging in the station. Choose the size that fits your shell, whether you want a small cross near the brim or a large one across the side. These helmet stickers are made for working gear, and they hold up to the handling that comes with it.

Four Finishes, Four Ways to Run Your Cross

Every firefighter runs their helmet a little differently, so this kit comes in four finishes. Matte gives you the low-profile, no-shine look that blends into a well-worn shell. Gloss makes the colors pop under station lighting and photographs cleanly. Clear vinyl lets the cross sit right on your helmet color, so the design floats instead of sitting inside a printed background. Static cling goes on with no adhesive at all, which makes it a good pick if you move between helmets or want to peel it off at the end of a detail. All four are printed with the same artwork, so the choice is purely about how you want it to look and how long you plan to keep it in place.

Sizing for Helmet Shells, Brims and Beyond

This kit is sold by decal size, with four options: 4, 8, 12 or 18 inches. A 4 inch cross fits nicely near the front brim or on the back of a modern firefighting helmet. The 8 inch size is the most common pick for the side of a traditional shell. The 12 and 18 inch sizes are large-format crosses made for turnout gear, apparatus doors, toolboxes, garage walls or the rear window of your personal vehicle. Before ordering, measure the flat area where you plan to apply it, keeping in mind that curved helmet surfaces pull the decal slightly inward. When in doubt, size down on a curved shell and size up on flat surfaces.

Application Tips from the Print Floor

Start with a clean, dry surface. On a helmet, wipe the area with isopropyl alcohol and let it fully evaporate, since dust and helmet sweat are the main reasons decals lift at the edges. Warm the decal slightly with a hair dryer before applying it to a curved shell; the vinyl becomes more flexible and conforms to the shape instead of tenting. Press from the center outward with a squeegee or the edge of a card, then work the edges down firmly. Wait a full day before the helmet sees rain or heavy handling. For static cling, skip the alcohol wipe and use a light mist of water to position the decal before squeegeeing it down.

What you get

• Maltese cross decal kit printed in-house on Cast Vinyl
• Available in matte, gloss, clear and static cling finishes
• Four decal size options: 4, 8, 12 or 18 inches
• Suitable for firefighter helmets, turnout gear, toolboxes and vehicle windows
• Precision-cut edges for a clean, professional look on curved shells
• Static cling version removes cleanly with no adhesive residue
• Made in the USA and shipped flat to prevent creasing

Specifications

Frequently asked questions

Will this decal stick to a curved firefighter helmet shell?

Yes. Cast Vinyl is thin and conforms well to curves. For best results, warm the decal with a hair dryer before applying, press from the center outward, and choose a smaller size if the surface is heavily curved.

What is the difference between the clear and static cling versions?

Clear vinyl has a permanent adhesive and lets the cross sit directly on your helmet's color with no printed background. Static cling has no adhesive at all, holds by surface tension, and peels off cleanly, which is ideal if you want a temporary option or plan to move it between surfaces.

Which size should I order for my helmet?

For the front brim or back of a modern shell, the 4 inch size works well. The 8 inch size fits most traditional helmet sides. The 12 and 18 inch crosses are intended for turnout gear, toolboxes, apparatus doors or vehicle windows. Always measure your flat application area first.