Matte Hood Decal Pack of 8 for Dodge Ram Trucks

Description

A set of eight matte vinyl hood decals cut for truck owners who want a clean, low-shine look on the front of their cab. Sized to fit a range of hood layouts and sold in four length options.

What Comes in This Matte Dodge Ram Hood Decal Set

This pack includes eight individual decals designed for hood and body placement on full-size pickup trucks. Each piece is cut from matte Cast Vinyl, so the surface reads flat and dark instead of glossy, which helps it blend with flat or Low-Gloss factory paint and tonneau covers. You get enough pieces in one set to dress the hood, mirror caps, fender tops, or rear window, or to split the set between two vehicles in the household. Every decal arrives weeded, masked with application tape, and ready to position. Because the set covers multiple areas at once, it costs less per piece than buying individual decals, and the matching finish keeps the whole truck looking like one coordinated build rather than a mix of parts from different sources.

Choosing Between 4, 8, 12 and 18 Inch Decals

The full set is offered in four decal sizes: 4, 8, 12, or 18 inches, measured along the longest edge of each piece. Smaller sizes work well for mirror caps, door corners, and the area around the hood scoop or fender vents. The 12 and 18 inch options are the ones most truck owners pick for center hood placement, where a longer Graphic can run along the hood ridge between the headlight lines. If you plan to mix sizes across the truck, order the set in the size closest to your largest planned placement, since all eight pieces in a pack are cut to the same length. Measure the flat area you want to cover before ordering, and leave a little margin on each side for edge curves.

How to Apply Your Hood Decals

Application takes a few basic tools: a spray bottle with soapy water if you prefer a wet method, a squeegee or old credit card, and a lint-free cloth. Start with a clean, dry, wax-free surface, ideally applied when temperatures are moderate and the hood is not hot to the touch. Peel the backing, position the decal using the application tape as a carrier, and squeegee from the center outward to push out air and moisture. Work slowly on curved sections and lift and reposition if needed on a wet application. After the tape comes off, go over the edges once more with the squeegee. Wait a day or two before pressure washing the area so the adhesive fully bonds to the paint.

Matte Finish Care and Removal

Matte vinyl asks for slightly different care than a glossy decal. Skip waxes and polish, which can leave shiny patches that stand out against the flat surface, and wash with mild soap and a soft cloth or mitt instead. Avoid abrasive brushes at automatic car washes, since scrubbing can scuff the matte texture over time. When you are ready for a change, warm the decal gently with a hair dryer on a low setting and peel it back at a shallow angle, working slowly so the vinyl comes up in one piece. Any remaining adhesive can be rolled off with a thumb and cleaned with a citrus-based remover rated for painted surfaces.

What you get

• Set of 8 matching matte decals for hood and body placement
• Cut from matte Cast Vinyl with a flat, low-shine finish
• Available in 4, 8, 12 or 18 inch decal sizes
• Arrives pre-weeded with application tape ready to install
• Suitable for exterior truck surfaces including hood, mirrors and fenders
• Can be applied wet or dry with a squeegee
• Removable with gentle heat without aggressive scraping

Specifications

Frequently asked questions

Are all eight decals in the set the same size?

Yes. Each pack is cut in one size, either 4, 8, 12 or 18 inches, measured along the longest edge of the decal. Choose the size that fits your main placement area, such as the center of the hood.

Will the matte finish match my truck's flat paint?

Matte vinyl has a flat, Low-Gloss texture that pairs well with flat or Low-Gloss paint finishes. On gloss paint it will read as a deliberate contrast, which many truck owners use intentionally for a two-tone hood look.

Can I remove these decals later without damaging the paint?

Yes. Warm the decal with a hair dryer on low heat and peel it back slowly at a shallow angle. Any leftover adhesive can be rolled off by hand and cleaned with a paint-safe adhesive remover.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.