Diesel Only Fuel Tank Sticker Decal 4-18 Inch

Description

A diesel only fuel gas tank sticker decal printed on durable Cast Vinyl, sized for tanks, cans and pumps. Made for drivers and equipment operators who want the fuel type marked clearly.

Why a Diesel Only Fuel Gas Tank Sticker Decal Matters

Misfueling costs time and money, and it happens most often when someone grabs the wrong nozzle or fills a portable can without checking the label. A diesel only fuel gas tank sticker decal puts the fuel type right where hands and eyes land: on the tank, the filler neck or the can handle. This decal is cut in a clean layout with bold lettering that stays readable at a glance, even from a few steps away. Apply it to work trucks, farm equipment, generators, transfer tanks and jerry cans so anyone handling fuel knows what goes in and what stays out. It is a small label that prevents a big headache at the pump.

Cast Vinyl Built for Fuel-Side Duty

We print this diesel only decal on Cast Vinyl, the material we choose for surfaces that flex, curve and live outdoors. Cast Vinyl conforms to the gentle curves of a tank or fuel door without lifting at the edges, and it holds its ink under sun, rain and road grime far better than paper labels or cheap printed tape. The matte finish cuts glare so the word diesel stays legible in bright daylight, while the gloss option adds a crisp, high-contrast look if you prefer a shine. Both finishes are cut with a weather-resistant adhesive layer designed to stay put through washes and weather cycles.

Choosing Your Decal Size

This decal comes in four sizes: 4, 8, 12 and 18 inches, measured at the longest point of the design. The 4 inch works well on small jerry cans, toolboxes and generator tanks where space is tight. The 8 inch fits standard fuel doors and truck bedsides. The 12 inch suits transfer tanks, saddle tanks and larger equipment, and the 18 inch is made for bulk tanks, trailers and pump stands where you want the message visible from across a yard. If you are labeling several containers, pick the size that matches your smallest tank so the set looks consistent across everything you fill.

Applying Your Diesel Decal

Application takes a few minutes with basic prep. Clean the surface with rubbing alcohol and let it dry completely so no dust or fuel film sits under the adhesive. Peel the backing, position the decal, and press from the center outward with a squeegee or the edge of a card to push out air. A dry application works for most flat and gently curved spots; for tighter curves, a light mist of soapy water lets you slide the decal into place before squeegeeing it down. Wait a full day before pressure washing or fueling around the area so the adhesive bonds fully. Full instructions ship with every order.

What you get

• Printed on durable Cast Vinyl that conforms to curved tank surfaces
• Available in matte, gloss, static cling and clear finishes
• Four size options: 4, 8, 12 and 18 inches
• Bold diesel only lettering readable at a glance
• Indoor and outdoor use on tanks, cans, trucks and equipment
• Precision die-cut edges for a clean, professional look
• Made to order in the USA

Specifications

Frequently asked questions

Will this decal hold up near fuel spills?

The Cast Vinyl and adhesive are made for outdoor use around fuel equipment. Wipe spills off promptly and avoid direct contact with solvents. Let the decal cure for about a day after application before cleaning around it.

Which size should I choose for a portable diesel can?

The 4 inch size fits most portable cans and small tanks. For truck tanks or transfer tanks, the 8 or 12 inch is usually a better match, and the 18 inch works best on bulk tanks and pump stands.

Can I remove the decal later?

Yes. Warm the decal with a hair dryer and peel it off slowly from one corner. Any remaining adhesive can be cleaned with rubbing alcohol. Static cling finishes peel off cleanly with no residue.