Toolbox Decal Kit | Die Cut Vinyl Stickers 4-18 Inch

Description

A die cut Vinyl Decal kit built for toolboxes, chests, and job-site storage. Choose 4, 8, 12, or 18 inch decals and dress up your gear in minutes.

Made for Toolboxes and Job-Site Gear

Your toolbox goes everywhere with you, so it might as well look the part. This die cut Vinyl Decal kit is cut to shape with no clear background, so each sticker reads clean against steel, aluminum, or powder-coated surfaces. Apply one large decal to the lid of a rolling chest or mix smaller pieces across drawers and side panels. The matte finish blends in like paint, while gloss adds shine that stands out under lights. It is a simple way to mark your gear, tell identical boxes apart on a crowded site, or just give a well-used chest some personality before the next project.

Custom Die Cut Stickers in Four Practical Sizes

Pick the size that fits your setup: 4 inch decals work well on drawer fronts and handle ends, 8 inch pieces suit mid-size portable boxes, 12 inch decals fill a standard lid, and 18 inch designs cover the top of a full-size chest. Every decal is die cut to the artwork outline, trimmed by machine for consistent edges, and shipped with application tape so it goes down in one piece. Because each size is cut from the same artwork, you can order a combination that keeps a matching look across every box on your bench or in your truck.

How to Apply Your Decals

Start with a clean, dry surface; wipe the area with isopropyl alcohol and let it fully evaporate. Peel the backing, position the decal with the application tape still in place, and press from the center outward to push air toward the edges. Work slowly with a squeegee or the edge of a card, then peel the tape back at a low angle. Decals apply best when the surface is at room temperature. On textured or heavily scratched toolbox lids, press firmly over the ridges so the vinyl conforms. If you need to reposition, lift gently before smoothing the decal down for good.

Finishes, Care, and Ordering

Each kit is printed on your choice of matte, gloss, clear, or static cling vinyl. Matte keeps a low-profile painted look, gloss adds shine, clear lets the box color show through the design, and static cling applies without adhesive for temporary displays or rental gear. Wipe decals with a soft damp cloth; skip harsh solvents and abrasive pads. Choose your decal size and finish at checkout, and every piece in the kit arrives trimmed, masked, and ready to apply. Orders ship flat in protective packaging so edges arrive crisp, not curled or creased.

What you get

• Die cut to the artwork outline with no clear background
• Available in 4, 8, 12, or 18 inch decal sizes
• Matte, gloss, clear, or static cling finish options
• Printed on Cast Vinyl for detailed artwork and clean edges
• Ships with application tape for one-piece installation
• Indoor and covered outdoor use on toolboxes, chests, and storage

Specifications

Frequently asked questions

Which decal size should I choose for my toolbox?

A 4 inch decal fits drawer fronts and small boxes, 8 inch works on portable chests, 12 inch suits a standard lid, and 18 inch covers a full-size rolling chest lid. Measure your flat application area before ordering.

Will these decals stick to a powder-coated toolbox?

Yes. Clean the surface with isopropyl alcohol first, then press firmly from the center outward so the vinyl conforms to any texture.

What is the difference between static cling and the other finishes?

Static cling applies without adhesive, so it can be removed and reapplied without residue. Matte, gloss, and clear finishes use adhesive for a more permanent hold.