Personalized Monogram Initial Bumper Decal for Cars

Description

A personalized initial decal cut from cast vinyl, made to order for your car, truck or SUV. Choose your letter and pick a 4, 8, 12 or 18 inch size in matte, gloss, clear or static cling.

Your Initial, Cut One Letter at a Time

Some of the most popular custom bumper stickers we print are the simplest ones: a single letter in a clean monogram style. You send us the initial, we cut it from vinyl and ship it ready to apply. There is no background material in a die-cut decal, so once it is on your bumper, tailgate or rear window, all you see is the letter itself. It works as a personal signature for your vehicle, a gift for a new driver, or a way to mark a family car. Choose a classic serif look or a simple block letter, then pick the size that fits your space. Every order is cut after you place it, so each decal is made specifically for you rather than pulled from a shelf.

Four Finishes and Four Sizes

We cut monogram decals in matte, gloss, clear and static cling finishes. Matte has a soft, low-sheen look that blends into painted surfaces and does not fight with the color of your vehicle. Gloss gives the letter a crisp, polished edge that reads well at a distance. Clear works nicely on glass, letting the letter appear to float. Static cling uses no adhesive at all, so it is a good pick if you want to move the decal between vehicles or remove it whenever you like. Sizes run 4, 8, 12 and 18 inches, measured by the height of the letter. A 4 inch initial suits a corner of a window, while 12 and 18 inch letters make a bolder statement across a bumper or tailgate.

How to Apply Your Monogram Decal

Application takes a few minutes with no special tools. Clean the area with rubbing alcohol and let it dry completely. Peel the backing paper away so the letter stays on the transfer tape, then position the decal where you want it. Press from the center outward with a squeegee or a credit card edge to push out air, working slowly so the vinyl lays flat. Peel the transfer tape back at a low angle, and the letter stays behind. On cold days, warm the surface slightly first so the vinyl conforms. Static cling versions skip the adhesive entirely: just press the letter onto clean glass and smooth it out. Full step-by-step instructions ship with every order.

Made in Our Shop, Shipped to Your Door

Each monogram initial decal is cut and finished in our US shop after you order it. We use cast vinyl for curved areas like bumpers and body panels, and calendered vinyl works fine for flat surfaces like windows and tailgates. Because every letter is cut to order, we can accommodate the details that matter to you, from letter choice to size to finish. Orders ship protected in a rigid mailer so the decal arrives flat and ready to apply. If you are ordering several initials for a family, a team or a small group, reach out and we can set up the set so everything arrives together. Pricing sits in the same range as other personalized decals, typically between $8.99 and $17.99 depending on size and finish.

What you get

• Personalized single-letter monogram, cut to your chosen initial
• Available in 4, 8, 12 or 18 inch letter heights
• Four finish options: matte, gloss, clear or static cling
• Die-cut with no background, so only the letter shows
• Cast vinyl for curved surfaces, calendered vinyl for flat areas
• Cut and shipped from our US shop after you order
• Application instructions included with every decal

Specifications

Frequently asked questions

How is the decal sized?

Sizes are measured by the height of the letter itself: 4, 8, 12 or 18 inches. Pick the size based on where you plan to place it, keeping in mind that a taller letter is also wider.

Will the decal damage my paint or glass?

Applied to a clean, intact surface and removed by peeling slowly, the vinyl should not damage paint or glass. Avoid applying over fresh paint or damaged clear coat.

Can I remove or reposition the decal?

Adhesive decals are intended for one-time application. If you want to move your initial between vehicles or remove it often, choose the static cling finish, which uses no adhesive and repositions on glass.