Chevy Silverado Hood Stripe Decal Kit | Truck Hood Decals

Description

A two-piece hood stripe decal kit cut to fit the hood of your Chevy Silverado. Choose from 12 to 48 inch widths in matte, gloss, clear or static cling finishes.

Hood Stripes Made for the Silverado

This decal kit is cut with the Silverado hood in mind, so the stripes follow the lines of the panel instead of fighting them. Each set arrives as a matched pair, one stripe for each side of the hood, ready to position and apply. You pick the width that suits your build, anywhere from 12 inches up to 48 inches, so whether you want a subtle accent or a bold racing-inspired look, the set scales to match. Because these are truck hood decals designed around a specific vehicle, you spend less time trimming and more time enjoying the result. Not affiliated with or endorsed by the manufacturer.

Four Finishes, One Simple Choice

Every stripe set we print is available in the same four finishes, and this kit is no exception. Matte gives a low-key, painted-on look that blends into flat or low-gloss paint. Gloss adds depth and reads like a factory stripe under sunlight. Clear vinyl works as a protective layer over existing paint or graphics while keeping a nearly invisible profile. Static cling is the pick for anyone who wants a temporary look, since it holds without adhesive and peels off clean when you are done. Whichever you choose, the vinyl is printed in our shop and shipped as a complete set with application instructions.

Applying Your Hood Stripe Set

Application is a straightforward afternoon project with basic tools. Start with a clean, dry hood, free of wax and dust, ideally in moderate temperatures out of direct sun. A spray bottle of soapy water lets you slide the stripes into position before squeegeeing out the fluid. Work from the center outward to push air and water to the edges, then let the set settle before removing the transfer tape. The wider widths benefit from a second pair of hands, so grab a friend for the 36 to 48 inch options. Detailed step-by-step instructions ship with every kit, and a heat gun or hair dryer helps the vinyl conform around hood contours.

Sizing and Ordering

Each set is sold as a pair of matching stripes, with your choice of overall width from 12, 18, 24, 30, 36, 42 or 48 inches. Measure your hood before ordering, accounting for hood scoops, vents or trim that might sit in the stripe path, and pick the width that clears those features. Pricing sits between 49.99 and 149.99 dollars depending on the width and finish you select. If you are unsure which width works best for your truck, a quick measurement across the flat area of the hood, edge to edge, is the number to compare against. Every order is printed after you buy, so your set is fresh vinyl, not shelf stock.

What you get

• Two-piece stripe set cut to fit the Chevy Silverado hood
• Width options from 12 to 48 inches
• Available in matte, gloss, clear or static cling finishes
• Printed on cast or calendered vinyl in our US shop
• Static cling option removes clean with no adhesive residue
• Application instructions included with every set
• Printed to order for fresh, workable vinyl

Specifications

Frequently asked questions

Will these stripes fit my Chevy Silverado?

The set is cut with the Silverado hood in mind and offered in multiple widths so you can match your hood size. Measure the flat area of your hood before ordering and choose the closest width. Not affiliated with or endorsed by the manufacturer.

Can I remove the stripes later?

Yes. Static cling peels off by hand with no adhesive. The adhesive-backed finishes can be warmed with a hair dryer or heat gun and peeled away slowly, then any remaining residue cleaned with an adhesive remover.

Which finish should I choose?

Gloss is the most popular for a factory-stripe look, matte blends with flat paint, clear works over existing paint or graphics, and static cling is best if you want a temporary install.