Gloss ATV Fender Graphic Decal Kit | Vinyl Decal Kits

Description

A gloss-finish fender Graphic decal kit cut from Cast Vinyl, made for riders who want to dress up their ATV bodywork. Choose the decal size that fits your fenders and apply with basic tools.

Gloss Fender Graphics That Refresh Your Ride

This ATV fender Graphic decal kit brings a clean, high-shine look to tired plastic bodywork. Each Graphic is printed on Cast Vinyl with a gloss finish that reads like a factory-style accent once applied. The kit is designed for flat and gently curved fender surfaces, so you can place the panels where they show best, whether that's the front fenders, rear quarters, or both. Riders use these kits to cover scuffs, add contrast against solid plastics, or simply change the personality of a machine they ride every weekend. If you have been browsing motorcycle decals kits for street bikes and wished something similar existed for quads, this is that option, sized and shaped for ATV body panels.

Cut From Cast Vinyl for Flexible Fender Curves

Fenders flex, and a decal that cracks after one ride is not worth applying. We print these graphics on Cast Vinyl, which is the thinner, more conformable choice for parts with contour. The gloss laminate layer sits on top of the print, adding scratch resistance against boots, brush, and wash mitts. Application is a dry or wet install using standard tools: a squeegee or credit card to press the Graphic down, and a heat source like a hair dryer to help the vinyl settle around curves. Take your time cleaning the plastic first, because fenders collect chain lube, mud, and armor spray that all fight adhesion. Prep well and the graphics lay flat with no silvering.

Pick Your Decal Size Before You Order

Every kit is sold in decal sizes of 4, 8, 12, or 18 inches, measured at the longest point of the largest Graphic in the set. Smaller sizes work as accent pieces near vents, headlight surrounds, or grab bars, while the 12 and 18 inch options fill a full fender panel with one statement Graphic. If you are covering a scuffed area, measure the damage zone first and choose the size that overhangs it slightly. Mixing sizes across a kit is common, so many riders order one larger set for the rear fenders and a smaller set up front. When in doubt, measure twice, because vinyl trimmed to fit looks cleaner than a Graphic that comes up short.

Applying Your ATV Fender Decal Kit

Start with a thorough wash and a wipe-down with isopropyl alcohol to strip residue from the plastic. Let the surface dry completely, then position each Graphic with light masking tape before committing to placement. Peel the backing, tack one edge, and squeegee outward from the center to push air toward the edges. On curved sections, warm the vinyl gently and stretch it around the bend rather than forcing it flat. Finish by trimming any overhang with a sharp blade and re-pressing the edges. Avoid riding or pressure-washing the area for the first day so the adhesive sets. Removal later is straightforward with heat, and a gloss finish resists fading from sun exposure during regular trail use.

What you get

• Cast Vinyl construction that conforms to curved ATV fender panels
• Gloss finish with a laminated top layer for scratch resistance
• Available in 4, 8, 12, or 18 inch decal sizes
• Kit includes multiple graphics for front and rear fender placement
• Wet or dry application with a squeegee and a household heat source
• Printed in the USA by LEO Sticker
• Removable with heat when you want to change your look

Specifications

Frequently asked questions

Will these decals fit my specific ATV model?

The graphics are sold by decal size rather than by model, so they are not model-specific. Measure the flat or gently curved areas of your fenders and choose the 4, 8, 12, or 18 inch size that fits your panels.

How do I get the decals to stick to textured or scuffed plastic?

Clean the area with soap and water, then wipe with isopropyl alcohol and let it dry fully. Apply firm, even pressure with a squeegee, and use gentle heat to help the vinyl conform and bond to the surface.

Can I pressure wash my ATV after applying the kit?

Wait at least 24 hours after installation before washing so the adhesive fully sets. After that, avoid aiming a pressure washer nozzle directly at the decal edges at close range, which can lift the vinyl.