By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A matte American flag tailgate decal printed on Cast Vinyl, sized for GMC Sierra 1500 tailgates and truck owners who want a clean, weather-ready look. Available in 4, 8, 12 or 18 inch sizes.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This American flag tailgate decal is designed with truck owners in mind, sized to sit neatly on the flat face of a Sierra 1500 tailgate. The stars-and-stripes artwork is laid out in a horizontal format that fills the space without wrapping around edges or covering the Graphic area. Choose 4 inches for a small accent near the handle, 8 or 12 inches for a balanced center placement, or 18 inches for a full-width statement. Each decal is cut as a single piece so the stripes stay aligned during application. It is part of our Chevrolet & GMC Sierra 1500 decals collection, where you will find more tailgate and body graphics in the same sizing system.
We print this flag on matte Cast Vinyl because it does the best job of blending into a factory tailgate. The low-sheen surface absorbs light instead of bouncing it back, so the decal reads as part of the truck rather than a sticker stuck on top of it. Cast Vinyl is thin and conformable, which helps it lay flat over slight texture in the tailgate panel. The matte finish also hides fingerprints and water spots far better than a gloss surface, which matters on a tailgate that gets handled, leaned on and hosed off. If you prefer a shinier look, the same artwork is available in our gloss, clear and static cling finishes.
Application is a dry, single-piece install that most owners finish in under ten minutes. Clean the tailgate with isopropyl alcohol and let it dry completely. Peel the backing, position the decal using the top stripe as your level reference, and press from the center outward with a squeegee or the edge of a credit card. The air-release properties of Cast Vinyl let you push small bubbles to the nearest edge instead of trapping them. Work in temperatures above 50 degrees Fahrenheit for best adhesion. Full illustrated instructions ship with every order, and the same steps apply to every size from 4 to 18 inches.
Size choice comes down to where on the tailgate you want the flag and how visible you want it from a distance. The 4 inch decal works as a subtle accent near the tailgate handle or on the corner of the bed. The 8 inch size is a popular middle ground that fits between the handle and the taillight on most Sierra 1500 tailgates. The 12 inch decal covers roughly half the tailgate width and reads clearly from a car length away. The 18 inch option spans nearly the full flat area for a bold, full-flag presentation. All four sizes use the same proportions, so the artwork looks correct at any scale.
The decal is proportioned for the flat face of a Sierra 1500 tailgate. The 8 and 12 inch sizes fit between the handle and taillight on most model years, while the 18 inch size spans nearly the full flat area. Measure your tailgate before ordering to confirm the size you prefer. Not affiliated with or endorsed by the manufacturer.
Yes. Warm the decal gently with a hair dryer on low heat and peel it away slowly at a shallow angle. Any remaining adhesive can be cleaned off with isopropyl alcohol. Avoid using sharp tools against the paint.
Absolutely. It works on any smooth, clean surface including toolboxes, bed covers, coolers, windows and garage doors. Just make sure the surface is free of wax, dirt and moisture before applying.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
