By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
This two-pack new driver sticker in removable adhesive vinyl is made for rear glass and plastic bumpers, helping other drivers give a learner some space. Choose from three sizes to fit your vehicle. You can see the rest of the student driver sticker range here.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
Each pack includes two identical new driver stickers cut in a horizontal bumper format, so you can outfit a single car with a spare or place one on two family vehicles. The decals are printed on removable adhesive vinyl and sized for flat, smooth areas such as rear windshields and plastic bumper surfaces. The message is simple and easy to read at a glance, which is the whole point: it signals to the drivers behind you that the person at the wheel is still building experience. Apply one to the rear glass or the bumper, wherever it is most visible from following traffic. Keeping the second sticker in the glove box means you always have a replacement ready.
Three size options let you match the sticker to your vehicle and how visible you want it to be. The 8 x 3 in version works well on compact cars, sedans, and smaller rear windows where a shorter footprint is needed. The 10.5 x 4 in option is a middle ground that suits most crossovers, hatchbacks, and midsize sedans. The 12 x 4 in size is the largest and reads most easily from a distance, a good fit for SUVs, trucks, and vans with wide bumper or glass areas. Before ordering, measure the spot where you plan to place the decal and compare it to the listed dimensions so the fit is right the first time.
Start with a clean, dry surface; wash the glass or bumper and let it dry completely so dust does not get trapped under the vinyl. Position the sticker without removing the backing first to confirm placement. Peel the backing away, then apply one edge and smooth the decal down gradually, working outward to push air toward the open edge. The removable adhesive lets you reposition during install if the first attempt is crooked, so lift and reset rather than stretching the material. Press firmly across the whole surface when you are satisfied. Avoid applying in freezing temperatures or direct hot sun, as extreme cold or heat makes vinyl harder to work with.
Once applied, the decal needs little attention. Hand washing around the sticker is the gentlest approach; avoid aiming a high-pressure washer nozzle directly at the edges, since concentrated spray can lift them over time. Because this is a removable adhesive vinyl, taking the sticker off is simple: lift a corner and peel slowly, and it peels off cleanly without residue. If a corner resists, warm it gently with a hair dryer on low to soften the adhesive before continuing. If any small traces remain, they wipe away with mild soapy water. This also makes the decal a practical choice for borrowed, leased, or family-shared vehicles.
This two-pack is aimed at parents of teen drivers, adults returning to driving after a break, and anyone with a learner behind the wheel who wants a little extra patience from surrounding traffic. It also works for driving instructors or families with a practice car that different beginners use. The spare sticker covers a second household car or replaces one that gets damaged. Because the adhesive is removable, it suits leased vehicles and cars that will eventually be sold or handed down. If you are looking for a new driver sticker that communicates clearly, applies easily, and lifts off without residue when the learning phase is over, this format is built for that job.
No. The decal uses removable adhesive vinyl, so it peels off cleanly without residue from rear glass and plastic bumpers. Peel slowly from a corner, and warm gently with a hair dryer on low if the edge resists. Any faint traces wipe away with mild soapy water.
Yes. The removable adhesive allows repositioning during installation. Lift the decal and reset it rather than stretching the vinyl, then press firmly across the surface once you are happy with the placement.
The 8 x 3 in size suits compact cars and smaller windows, 10.5 x 4 in fits most sedans and crossovers, and 12 x 4 in works best on SUVs, trucks, and vans. Measure the area where you plan to place the sticker and compare it to the listed dimensions before ordering.
The two-pack gives you a spare. You can place one on each of two family vehicles, keep the second as a replacement, or use it on a shared practice car. Both stickers are identical in size and design.
8 x 3 in, 10.5 x 4 in, 12 x 4 in
Your shopping cart is empty
Notifications