Checkered Flag 4x4 Decal Set for Trucks & SUVs

Description

A pair of checkered flag off-road decals cut from cast vinyl, made for truck beds, tailgates and SUV rear windows. Choose the width that fits your rig.

Checkered Flag Pair Built for Offroad 4x4 Decal Fans

This two-piece checkered flag set is cut for people who actually use their rig off the pavement. The classic black-and-white checker pattern reads clearly from a distance, so it works on tailgates, bed sides, quarter panels and rear windows. Each flag is a separate decal, which gives you freedom on placement: run them mirrored on both sides of the truck, stack them on the tailgate, or split them between the SUV and the trailer. The set ships in your choice of width from 12 inches up to 48 inches, so whether you want a small accent on a rear quarter window or a full-width statement across a truck bed, there is a size that fits. Simple, bold and instantly recognizable at the trailhead.

Choose Your Finish and Size

Every set is printed on cast vinyl and available in four finishes: matte for a low-profile painted-on look, gloss for a crisp high-contrast shine, clear for a subtle overlay effect, or static cling if you want a removable option that peels off without residue. Sizing runs from 12 inches to 48 inches in width, measured across the widest point of each flag. For truck beds and tailgates, many buyers pick 24 inch or larger flags so the checker squares stay legible from a distance. For SUV rear windows, side quarter glass or toolboxes, the 12 to 18 inch range usually fills the space without crowding it. Measure your mounting area before ordering and leave a little margin on each side.

Applying Your Flag Decals

Application is a straightforward dry or wet install with transfer tape. Clean the surface with isopropyl alcohol and let it dry completely. Peel the backing, position the flag, and squeegee from the center outward to push out air, then remove the transfer tape slowly at a low angle. Larger 36 and 48 inch flags are easier with a second pair of hands and a light mist of application fluid, which lets you slide the decal into final position before squeegeeing it down. Flat surfaces give the cleanest result; on textured bed liners or body panels with ridges, work the vinyl into the low spots with a felt-edge squeegee. Avoid applying in cold weather or direct hot sunlight.

Why Buy This Set from LEO Sticker

Each set is printed and cut to order in our US shop, so your flags are fresh stock rather than something that sat in a warehouse for a season. We offer all four of our finishes in every size, and the matte and gloss options use cast vinyl that conforms to gentle curves rather than fighting them. The set of two means you get matching flags for both sides of your rig without buying duplicates, and at this size range the price per flag works out well against single-decal listings. If you are building out a full off-road theme, this pattern pairs naturally with our other trail-inspired designs in the same collection. Questions on sizing or finish choice? Message us before ordering and we will help you pick.

What you get

• Set of 2 matching checkered flag decals
• Available in 12", 24", 36" and 48" widths
• Choose matte, gloss, clear or static cling finish
• Printed on cast vinyl that conforms to gentle curves
• Cut to order in our US shop
• Ships with transfer tape for easier positioning
• Works on tailgates, truck beds, SUV windows and toolboxes

Specifications

Frequently asked questions

How do I pick the right size?

Measure the flat area where you plan to mount each flag and choose the width that fits with an inch or two of margin. For tailgates and truck beds, 24 inches or larger is common; for side windows and smaller panels, 12 to 18 inches usually fits best.

Can I put these on my rear window?

Yes. The flags work on glass and painted surfaces. If you want the option to remove and reposition them later, choose the static cling finish, which holds to smooth glass without adhesive.

Do the two flags come as one piece or separately?

They are two separate decals, each with its own transfer tape. That lets you space them independently, mirror them on opposite sides of the vehicle, or place them on two different surfaces.