Viper Spear Racing Stripes Decal Set for Trucks

Description

A pair of spear-cut vinyl racing stripes for cars and trucks, printed on your choice of matte, gloss, clear or static cling finish. Sold as a set of two with widths from 12 to 48 inches.

Spear-Style Custom Racing Stripes That Follow Your Lines

This decal set takes the classic racing stripe idea and sharpens it into a spear profile that tapers toward the front of the hood or tailgate. The angled cut gives the stripe a sense of motion even when the vehicle is parked, and it works with the body lines most trucks and cars already have. Each set includes two matched pieces, one for each side, so you can center the pair or offset them to suit your build. Whether you drive a work truck or a weekend cruiser, the spear shape reads as intentional rather than generic, and it pairs well with factory paint as well as repainted or wrapped panels.

Choose Your Width From 12 to 48 Inches

Every vehicle is different, so this set is offered in a range of widths from 12 inches up to 48 inches, measured at the widest point of the pair. Narrower widths suit smaller cars, compact crossovers and single-panel accents, while the wider options fill the hood and roof of full-size trucks. If you plan to run the stripes from the front bumper over the hood and up the roof, measure the full length first and pick the width that keeps the pair proportional to your vehicle's shoulders. When in doubt, a mid-range width is a safe starting point that looks balanced on most cabs and beds.

Matte, Gloss, Clear or Static Cling Finishes

We print this design on cast vinyl in four finishes, and each one changes the character of the stripe. Gloss finish sits closest to a factory painted look and blends with most clear-coated paint. Matte finish reads as a flat, printed-on effect that contrasts with glossy paint. Clear vinyl carries the printed spear in a subtle outline style for buyers who want the shape without a solid color block. Static cling uses no adhesive at all, so it can be repositioned or removed without residue, which makes it a good choice for leased vehicles or short-term display.

Applying Your Stripe Set

Application is a wet or dry process depending on the finish you choose. Clean the surface with isopropyl alcohol and let it dry fully before positioning the first piece. Use the second stripe as a visual reference to keep the pair even, working from the center outward with a squeegee or soft card to push out air and fluid. Static cling pieces should be applied to glass or very smooth panels with a light mist of water. Avoid applying in direct sun or cold weather, and wait before washing the vehicle so the vinyl can settle. Full instructions ship with every set.

Built for Highway Miles, Car Washes and Weather

These racing stripes are cut from durable vinyl rated for outdoor use, so they hold up against sun, rain, road salt and repeated car washes. The material resists fading and peeling when properly applied to a clean surface, keeping the spear design crisp season after season. Static cling finishes offer a temporary option that can be removed and repositioned without adhesive, which works well for truck owners who want stripes for shows, events or short-term styling changes. Adhesive-backed matte, gloss and clear finishes provide a longer-term look that stays put through daily driving. If you ever decide to change your setup, the decals can be removed without leaving heavy residue when warmed gently and peeled slowly, letting you update your truck's appearance whenever the mood strikes.

Cut to Fit Trucks, Tailgates and Fenders

Each set is sized with trucks in mind, so the spear-style stripes can run along hood edges, fender contours, bed sides and tailgates without awkward trimming. The tapered design follows body lines naturally, which means fewer visible seams and a cleaner flow from front to rear. Installation works best on smooth, wax-free surfaces, so wash and dry your truck thoroughly before starting and avoid applying in cold temperatures or direct sunlight. A squeegee or soft edge helps press out air bubbles as you work from the center outward. With a little patience, most truck owners can complete the job in an afternoon using basic tools, and the results look like a professional custom paint job at a fraction of the cost and commitment.

What you get

• Set of two matched spear-cut stripes, one for each side
• Available in 12, 16, 20, 24, 30, 36, 42 and 48 inch widths
• Cast vinyl printed in matte, gloss, clear or static cling
• Spear profile tapers toward the leading edge for a motion effect
• Static cling option removes without adhesive residue
• Wet or dry application with squeegee, instructions included
• Fits hoods, roofs, tailgates and bed panels on cars and trucks

Specifications

Frequently asked questions

How do I pick the right width for my vehicle?

Measure the area where the widest part of the stripe pair will sit, such as the hood or roof. Choose a width that leaves even margins on both sides. Narrower widths suit cars and smaller trucks; wider sizes fill full-size truck hoods and roofs.

Will these stripes damage my paint?

Applied to factory paint in good condition, the vinyl removes like any standard decal. Warm the vinyl gently with a hair dryer and peel slowly. Static cling uses no adhesive and lifts off clean from glass and smooth panels.

Can I apply the set myself?

Yes. Each set ships with step-by-step instructions. Work in a shaded area on a clean, dry surface, and use a squeegee to press out air or application fluid. Larger widths are easier with a second person holding the decal level.