Baby On Board Decal - Clear Vinyl Window Sticker for SUVs

Description

A clear baby on board decal printed on transparent vinyl, made for parents who want a subtle safety notice on their SUV window. Choose from four sizes to fit your glass.

Why a Clear Baby On Board Decal Works on SUV Glass

A transparent decal lets the message stand out while keeping the rest of your view open. On an SUV, the rear glass is often tall and tinted, so a clear background blends in instead of adding a solid block of color. The lettering and diamond-shaped notice are printed with opaque ink so they stay readable from a distance, while the surrounding film disappears against the window. Parents, caregivers, and rideshare drivers alike use these notices to ask nearby drivers for a little extra patience in traffic. It is a small courtesy that reads clearly without turning your rear window into a billboard.

Choosing Your Decal Size: 4, 8, 12 or 18 Inches

This decal comes in four sizes measured at the longest point of the design. The 4 inch size suits a corner of the rear quarter glass or the side window of a smaller crossover. The 8 inch version is a popular middle ground for rear windows on sedans and compact SUVs. The 12 inch size fills more of the glass on midsize and full-size SUVs, staying legible from several car lengths back. The 18 inch option is made for large rear windows, liftgates, or drivers who want maximum visibility for carpool lanes and school pickup lines. Measure your glass before ordering to pick the best fit.

Applying Your Window Decal Without Bubbles

Application takes only a few minutes with everyday tools. Clean the glass with glass cleaner and let it dry completely. Peel the backing paper, position the decal on the outside of the window, and press from the center outward with a squeegee or a credit card wrapped in a soft cloth. Working from the middle pushes air toward the edges instead of trapping it under the film. The clear carrier keeps the lettering aligned during placement. Avoid applying in direct sunlight or extreme cold, since very hot or very cold glass makes positioning harder. Once applied, the decal sits flat and smooth on the surface.

Caring for the Decal Through Car Washes and Seasons

After application, routine care keeps the decal looking clean. Wait about a day before running an automatic car wash so the adhesive fully sets. Hand washing around the decal with mild soap and water is gentle on the edges. Avoid scraping the lettering with ice scrapers or pressure-washing the decal directly at close range. If you ever want to remove it, warm the film gently with a hair dryer on low and peel it away slowly from one corner; any leftover adhesive can be cleaned off with glass cleaner. The clear material is designed for exterior window use in everyday driving conditions.

What you get

• Printed on clear vinyl with opaque ink for readable lettering
• Available in 4, 8, 12 or 18 inch sizes
• Classic diamond-shaped baby on board notice design
• Applies to the outside of SUV, car, or minivan windows
• Smooth, bubble-free application with a squeegee or card edge
• Removable with gentle heat when no longer needed
• Single decal per set, ready to apply

Specifications

Frequently asked questions

Does this decal go on the inside or outside of the window?

It is designed for exterior application on the outside of the glass. Applying it outside keeps the lettering crisp even on tinted windows.

Will the clear background yellow over time?

The clear vinyl is made for window use, and we recommend parking in shade when possible to help the decal look its best. We do not promise a specific lifespan, since sun exposure and climate vary.

Can I remove the decal later without damaging the glass?

Yes. Warm the decal gently with a hair dryer on low heat and peel it off slowly from a corner. Clean any remaining adhesive with standard glass cleaner.