Dragon Flame Decals for Semi Trucks | Set of 2 Vinyl

Description

A set of two dragon flame vinyl decals cut from cast vinyl, sized for semi trucks, pickups and work vehicles. Choose a width from 12 to 48 inches to fit your cab or trailer.

Dragon Flame Decals Built for Semi Trucks and Big Rigs

This dragon flame design brings layered, sweeping flame licks with a scaled dragon head detail, giving long-haul trucks and heavy-duty pickups a bold, custom look. Each order includes two matching decals, so you can dress both sides of your cab, run a mirrored pair down your trailer, or split the set between a truck and a support vehicle. The set is cut to order in your choice of width from 12 inches up to 48 inches, measured at the widest point of the decal. Whether you want a subtle accent behind your door handle or a full-length flame treatment along your sleeper cab, the size range covers it. Pair it with other flame decals from our collection for a coordinated wrap-style effect.

Matte, Gloss, Clear and Static Cling Options

Every dragon flame set is printed on professional-grade cast or calendered vinyl, and you choose the finish that suits your build. Matte gives the flames a flat, painted-on look that blends into factory paint. Gloss adds shine and makes the colors pop against a clean cab. Clear finish keeps the design light and subtle on glass or lighter paint. Static cling offers a no-adhesive option that peels off clean, ideal for leased equipment, seasonal looks, or truck show weekends. All finishes are printed with fade-resistant inks and cut precisely so the flame edges stay crisp. Application tape comes pre-applied, so the decal lifts off the backing in one piece and lays down without fighting air bubbles.

Easy Application on Cab Doors, Fenders and Trailers

You do not need a shop to install these decals. Clean the surface with isopropyl alcohol, let it dry, and position the decal with the masking tape hinge method. Peel the backing, squeegee from the center outward, and pull the transfer tape slowly at a low angle. The vinyl conforms to gentle curves like door panels and fender skirts, and the cast option handles moderate contours without lifting. Detailed illustrated instructions ship with every set. For cold-weather installs, warm the surface and the decal slightly before applying, and press the edges firmly once positioned. Removal works the same in reverse: warm the decal, peel slowly, and clean off any residue with adhesive remover.

Sizing Guide for Your Truck or Trailer

Choosing the right width comes down to where you plan to place the pair. A 12 to 18 inch set sits well behind door handles, on toolboxes, or along the lower fender of a pickup. The 24 to 30 inch range fills a cab door or the quarter panel of a day cab nicely. For full-size semi applications, the 36 and 48 inch options stretch across sleeper panels, trailer sides, or hood accents with room to spare. Measure your intended area before ordering and compare it to the listed decal width, since the flame shape is measured at its widest span. If you are layering this design with other flame decals, leave a small gap between pieces so each edge reads cleanly.

What you get

• Set of 2 matching dragon flame decals, ready for both sides of your vehicle
• Available in widths from 12 inches to 48 inches, measured at the widest point
• Choice of matte, gloss, clear or static cling finish on cast or calendered vinyl
• Printed with fade-resistant inks for a crisp, long-lasting appearance
• Pre-masked with application tape for one-piece installation
• Conforms to gentle curves on doors, fenders, sleepers and trailer panels
• Static cling option peels off clean for leased trucks and temporary displays

Specifications

Frequently asked questions

How do I know which width to order?

Measure the area where you plan to place the decal and compare it to the listed width, which is taken at the widest point of the flame design. For semi cab doors and sleeper panels, most buyers choose 24 inches or larger, while 12 to 18 inches works well for pickups and accent placements.

Will these decals damage my paint when I remove them?

When installed on factory paint in good condition, the adhesive vinyl removes without damaging the finish. Warm the decal with a heat gun or hair dryer on low, peel slowly at a shallow angle, and clean any residue with an adhesive remover. If you want a fully temporary option, choose the static cling finish, which uses no adhesive at all.

Can I install the decals myself, or do I need a shop?

These are designed for DIY installation. Each set ships pre-masked with application tape and includes step-by-step illustrated instructions. A squeegee or credit card, some masking tape, and a clean surface are all you need. For best results, apply above roughly 50 degrees Fahrenheit or warm the surface first.