Matte Black Side Stripes for Model Y | LEO Sticker

Description

Matte black side stripe decals cut to dress up a Tesla Model Y with a clean, Low-Gloss racing line. Choose 4, 8, 12 or 18 inch stripe lengths to fit your build.

A Matte Black Side Stripe Set Built for the Model Y

This Vinyl Decal set adds a crisp horizontal accent line along the doors of your Tesla Model Y, giving the profile a longer, lower look without paint or wraps. Each stripe is cut from matte black Cast Vinyl with a low-sheen finish that reads almost like factory trim in certain light. The set is sized to follow the body line between the wheels, and you choose the stripe length that suits your stance: 4, 8, 12 or 18 inches per side. Whether you want a subtle tick behind the front wheel or a full-length sweep, the same decal design scales to your plan. Not affiliated with or endorsed by the manufacturer.

Matte Finish That Complements the Paint

Matte black is a favorite among Model Y owners because it sits quietly against both light and dark paint colors. On white or silver cars it creates a strong contrast band; on darker cars it adds tone-on-tone depth without shouting. The matte surface diffuses light instead of reflecting it, so the stripe blends with the door panel rather than floating on top of it. We also offer this side stripe design in gloss, clear and static cling finishes if you prefer a different look for the same shape. All finishes are printed and cut in our on Cast Vinyl chosen for conformability around body contours.

Installing Your Tesla Decals in a Driveway Afternoon

Installation is a wet-or-dry application using a standard squeegee and a spray of soapy water. Clean the door panel with isopropyl alcohol, position the stripe along the body crease, and work from the center outward to push out moisture and air. The Cast Vinyl conforms to gentle curves along the door skin, and the matte surface hides minor handling marks during the install. Take your time aligning the driver and passenger sides using the door handle or wheel arch as a reference point. Most customers finish both sides in under an hour with no tools beyond a squeegee and a steady hand.

Removal and Care Down the Road

When you are ready for a change, warm the stripe gently with a hair dryer on low and peel it back at a shallow angle. The adhesive is designed to release cleanly from factory paint without aggressive scraping, leaving minimal residue that wipes away with adhesive remover. For day-to-day care, wash the stripe along with the rest of the car using normal car shampoo and a soft mitt, and skip waxes or polishes directly on the matte surface to preserve its flat look. Avoid high-pressure spray nozzles pointed at the stripe edges. With reasonable care, the matte black finish keeps its even, Low-Gloss appearance season after season.

What you get

• Matte black Cast Vinyl with a flat, low-sheen finish
• Cut as a pair for driver and passenger side doors
• Four length options: 4, 8, 12 or 18 inch stripes
• Wet or dry application with a standard squeegee
• Conforms to door contours on the Model Y body line
• Removes with gentle heat and clean release from paint
• Also available in gloss, clear and static cling finishes

Specifications

Frequently asked questions

Do these stripes fit a Tesla Model Y specifically?

Yes, the stripe shape and proportions are designed to follow the Model Y door body line. Choose your preferred length of 4, 8, 12 or 18 inches per stripe. Not affiliated with or endorsed by the manufacturer.

Will matte black show up on a dark car?

On darker paint the stripe reads as a subtle tone-on-tone accent. If you want stronger contrast on a dark car, our gloss black version of the same stripe reflects more light and stands out more.

Can I remove the stripes without damaging the paint?

Yes. Warm the vinyl with a hair dryer on low heat and peel slowly at a shallow angle. Any remaining adhesive residue can be wiped off with a standard automotive adhesive remover.