By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A set of 10 kiss cut stickers printed on matte vinyl, ready to peel and apply. Made for anyone decorating laptops, water bottles, toolboxes, notebooks and vehicle windows.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
Each sticker in this pack of 10 is kiss cut, meaning the top vinyl layer is cut through while the paper backing stays intact. That leaves a slim border around every design, so you can peel one sticker at a time without bending the artwork or struggling with a knife. The backing sheet also keeps unused stickers flat and protected until you are ready for them. Matte vinyl gives each decal a soft, low-sheen finish that reads cleanly under bright light, which is why so many buyers choose it for laptop lids and car windows where glare would wash out a glossy print. Apply them to smooth, clean surfaces and press from the center outward for a smooth result.
Ten stickers means ten chances to decorate, share or replace. Spread them across a laptop, a tumbler, a cooler, a skateboard deck, a tool chest and a rear window, or keep a few spares for when one wears out or you upgrade a device. The matte finish suits surfaces that live outdoors or under fluorescent lighting because it does not throw reflections the way a gloss decal can. Choose the size that matches your project: a 4 inch sticker sits comfortably on a phone case or notebook cover, 8 inches works on a laptop lid or tumbler, and 12 or 18 inch decals make a statement on vehicle glass, doors, coolers and garage walls.
This pack is sold in decal sizes of 4, 8, 12 or 18 inches, measured at the longest point of the design. When ordering, pick the size that fits your smallest intended surface, since a sticker that fits a water bottle will look different on a truck rear window than the same artwork at 18 inches. All ten stickers in a pack come in the size you select. Each decal is printed on matte Cast Vinyl with a pressure-sensitive adhesive, cut with a peel border, and shipped flat. Before applying, clean the surface with rubbing alcohol and let it dry fully so dust and oils do not interfere with adhesion.
Matte vinyl is forgiving in daily use, but a few habits keep it looking sharp. Avoid abrasive scrubbers and strong solvents when cleaning around an applied sticker; a soft cloth with mild soap and water is enough. On tumblers, hand washing is gentler than a dishwasher cycle. On vehicles, avoid aiming a high-pressure washer directly at the sticker edge. If a corner ever lifts, press it back down with a fingertip while the surface is clean and dry. Because these are kiss cut stickers with a border, trimming a lifted edge with fine scissors is simple if you ever need to tidy one up. Store any unused stickers flat, away from heat and direct sunlight.
Kiss cut means the cutting blade passes through the vinyl layer but not the paper backing, leaving a peelable border around each sticker. You can remove one sticker at a time and the rest stay protected on the sheet.
Choose based on your smallest surface. A 4 inch sticker suits phone cases and notebooks, 8 inches fits laptops and tumblers, and 12 or 18 inch decals work best on vehicle windows, doors and large gear. All 10 stickers come in the size you select.
Matte has a soft, low-sheen look rather than a shiny one. Many buyers prefer it because it resists glare on laptops and vehicle glass, keeping the design easy to read in bright light.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
