Long Pinstripe Decal Roll for Trucks | 4-18 Inch Stripes

Description

A long pinstripe sticker roll cut from durable Cast Vinyl, made for truck owners who want clean accent lines along body panels, tailgates and toolboxes. Available in 4, 8, 12 or 18 inch decal sizes with matte, gloss or clear finishes.

Why Truck Owners Use Long Pinstripe Decal Rolls

A long pinstripe roll gives you continuous accent lines without piecing together dozens of short stickers. That matters on a truck, where panels are tall and gaps between trim and body lines run the full length of the cab or bed. Instead of trimming around every contour with individual decals, you lay one stripe and follow the panel edge. Common uses include outlining the tailgate, running a line along the bedside, accenting a hood scoop area, or dressing up a plain toolbox. The roll format also lets you cut custom lengths on the spot, so you can finish a job with offcuts instead of ordering more. Choose matte for a subtle painted-on look, gloss for a crisp highlighted line, or clear for a protective ghost stripe.

Choosing Your Pinstripe Size: 4, 8, 12 or 18 Inches

Pinstripes are sold in decal sizes of 4, 8, 12 or 18 inches, and the right pick depends on where the stripe lands. The 4 inch size works well for tight accents near door handles, mirror bases or window trim. The 8 inch size suits bedside character lines and tailgate borders. The 12 inch size fills larger panels like the hood or rear cab section. The 18 inch size is built for long runs along the rocker panel or the full length of the bed, where fewer cuts mean a cleaner finished line. If you plan to stripe several zones on one truck, many buyers grab a mid size first, test the look with low-commitment placement, then order a longer size for the full run.

Applying a Pinstripe Roll to Truck Body Panels

Start with a clean, dry surface; wash the panel and wipe it down with isopropyl alcohol to remove wax and road film. Park in the shade so the metal is cool to the touch. Peel a short section of liner, tack the stripe at your starting point, and work along the panel with a squeegee, peeling the liner a few inches at a time. On curves, gently stretch the vinyl and keep tension even so the line stays true. If you need to reposition, lift slowly before pressing fully. Once the stripe is down, go over it again with the squeegee and a soft cloth edge. Avoid washing the truck for the first day or two so the adhesive bonds fully to the panel.

Care, Removal and Ordering Notes

Routine care is simple: hand wash or use a gentle touchless wash, and avoid aiming high-pressure spray directly at the stripe edges. Matte finishes should not be waxed, since wax can leave shiny patches on the low-sheen surface. When you eventually want a change, warm the stripe with a hair dryer on low and peel it back at a shallow angle; any leftover adhesive usually comes off with a plastic scraper and adhesive remover. Each roll arrives ready to cut, so measure your panels before ordering and remember the available sizes are 4, 8, 12 and 18 inches. Static cling pinstripes are also an option if you want a temporary look for shows or seasonal styling.

What you get

• Cast Vinyl pinstripe roll, cut to length at installation
• Available in 4, 8, 12 or 18 inch decal sizes
• Matte, gloss, static cling and clear finish options
• Follows gentle curves and panel contours with light stretching
• Weather-resistant adhesive suited to truck exteriors
• Removable with heat when you want to change your look
• Made to order in our US

Specifications

Frequently asked questions

Can I cut the pinstripe roll to custom lengths?

Yes. The roll format is designed for cutting on site, so you can trim each stripe to fit your exact panel length and save offcuts for smaller accents.

Will the stripe stay on through truck washes?

With proper surface prep and full cure time, the vinyl adhesive holds up to normal washing. We recommend waiting a day or two after application before the first wash and avoiding direct high-pressure spray on the edges.

Which finish should I choose for a subtle look?

Matte blends in like a painted line and reads subtle on most paint colors. Clear works as an invisible protective stripe, while gloss gives the sharpest contrast. Static cling is best for temporary display use.