Tundra Bed Stripes Decal Pair | Toyota Racing Stripes

Description

A pair of Cast Vinyl bed stripe decals sized for full-size pickup truck beds, cut to order in your choice of 4, 8, 12 or 18 inch widths. Made for Tundra owners who want a clean racing stripe look without permanent paint work.

A Pair of Toyota Racing Stripes Built for the Truck Bed

This decal pair brings a classic racing stripe layout to the bed of your truck, with two matching stripes cut from Cast Vinyl and sized to run the length you choose. Each stripe is sold by width, in 4, 8, 12 or 18 inch options, so you can go with a slim accent line or a wide, bold pair depending on the look you want. The stripes are cut fresh when you order, not pulled from a shelf, and they ship as a mirrored pair so both sides of the bed match. If you have been browsing Toyota racing stripes for your Tundra and want something that fills the bed panels instead of just the hood, this set is designed for exactly that job.

Matte, Gloss, Static Cling or Clear: Pick Your Finish

Every pair is printed in the finish you select at checkout. Matte gives a low-sheen, painted-on look that blends into factory paint. Gloss adds shine and stands out against flat or Low-Gloss paint jobs. Static cling is a non-adhesive option that holds to smooth, clean surfaces and peels off without residue, which works well if you want a temporary stripe for a show, event or season. Clear finish prints the stripe artwork on transparent vinyl for a subtle tone-on-tone effect. All four finishes are printed with inks rated for outdoor exposure, and the vinyl is cut to shape so the edges follow the stripe line rather than sitting inside a printed border.

Installing Your Bed Stripes Without Bubbles

Start with a clean, dry, wax-free bed surface; wash the area and wipe it down with isopropyl alcohol, then let it fully dry. Warm the decal slightly with a hair dryer on cool days so the vinyl conforms. Peel the backing, position one end, and squeegee from the center outward, working air toward the edges. Take your time on cooler mornings, since cold vinyl is stiffer and harder to lay flat. Two people make alignment easier on the longer stripe widths. Avoid applying in direct hot sunlight or below about 50 degrees Fahrenheit. After application, wait a few days before pressure washing the bed or running it through an automatic wash.

Cut to Order in the Width You Choose

Each pair is made to your selected width of 4, 8, 12 or 18 inches, and both stripes in the set are cut to match so the pair lines up across the bed. Because these are cut at the time of order rather than mass produced, you get a fresh set that has not sat in storage losing tack. The set is intended for smooth, flat bed panels; if your bed has textured liner material or heavy contouring, the vinyl will conform best on the smoother painted surfaces around it. Choose your width, pick your finish, and the pair is printed, weeded, masked and shipped flat with application instructions included in the package.

What you get

• Sold as a matched pair of bed stripe decals
• Available in 4, 8, 12 or 18 inch widths
• Choose matte, gloss, static cling or clear finish
• Printed on Cast Vinyl with outdoor-rated inks
• Cut to order, never pulled from old stock
• Ships flat with masking and application instructions
• Static cling option removes clean with no residue

Specifications

Frequently asked questions

Do these stripes fit every Tundra bed?

The pair is cut by width, not to a specific bed length, so you trim or position them to suit your truck. They apply best to smooth, painted bed panels. We cannot claim exact factory fitment for any particular model year.

Which width should I choose?

The 4 and 8 inch widths give a slimmer accent stripe, while 12 and 18 inch widths create a wide, bold racing stripe look. Measure the panel area you want to cover before ordering to see which proportion suits your bed.

Can I remove the stripes later?

Yes. Warm the vinyl with a hair dryer and peel it away slowly at a low angle. Adhesive finishes may leave minor residue that cleans up with adhesive remover. Static cling peels off with no residue at all.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.