Toyota Racing Stripes Pair - Full Length Vinyl Decals

Description

A pair of full-length racing stripe decals cut from Cast Vinyl, sized for drivers who want a motorsport look on their daily sedan. Choose 4, 8, 12 or 18 inch stripe widths at checkout.

Two-Stripe Layout for a Classic Motorsport Look

This set gives you a matched pair of full-length racing stripes, so both sides of the car carry the same stripe width and spacing from front bumper to rear. The twin-stripe layout is the look most people picture when they think of a track-inspired car, and it works on sedans, coupes and hatchbacks alike. Because the stripes arrive as one continuous pair rather than separate pieces, alignment is straightforward: you set the pair once, center it, and both stripes land evenly. Choose 4 inch stripes for a subtle accent, 8 or 12 inches for a bolder statement, or 18 inches when you want the stripes to dominate the profile of the car.

Cast Vinyl Built for Outdoor Use

Each stripe is cut from Cast Vinyl, the conformable film that curves around body lines instead of tenting or lifting over them. That matters on a full-length run, because a stripe has to follow door handles, panel gaps, fender contours and trunk edges without wrinkling. The vinyl is rated for outdoor exposure and holds up to rain, sun and normal car washing. Application is a dry or wet install with transfer tape, and the material repositions during installation so you can fine-tune placement before it sets. Once down, the edges lay flat and stay put through daily driving. Removal later is done with heat and peels away without leaving residue behind.

Finish Options: Matte, Gloss, Clear or Static Cling

Pick the finish that matches your build. Gloss stripes read like painted-on color and blend with a factory clear coat. Matte stripes give a flat, muted contrast that photographs well against glossy paint. Clear stripes are cut from transparent film for a subtle tone-on-tone effect or for use under other graphics. Static cling versions apply without adhesive and peel off cleanly, which suits leased cars or anyone who wants a temporary look for a weekend event. All four finishes are cut to order in your chosen width, so the pair you receive is made specifically for the stripe size you selected, not pulled from a pre-cut bin.

Installing Your Toyota Racing Stripes at Home

You do not need a to install these. Start with a clean, wax-free surface and work in shade so the vinyl stays workable. Lay the stripe pair out dry first to confirm centering, then use the transfer tape to set it, working from the center outward with a squeegee to push air toward the edges. On complex curves, a little application fluid lets you slide the film into position before squeegeeing it down. Trim excess at the bumpers with a sharp blade. Most people finish a full-length pair in an afternoon, and the instructions included in the package walk through each step. Take your time on the first panel and the rest goes quickly.

What you get

• Sold as a matched pair of full-length racing stripe decals
• Available in 4, 8, 12 or 18 inch stripe widths
• Cut from Cast Vinyl that conforms to body lines and curves
• Four finish options: matte, gloss, clear or static cling
• Applies with transfer tape using dry or wet installation
• Rated for outdoor use, including rain and car washing
• Removable with heat without leaving adhesive residue

Specifications

Frequently asked questions

Which stripe width should I choose?

4 inch stripes are a subtle accent, 8 and 12 inch widths are the most popular for a bold racing look, and 18 inch stripes make the strongest statement. Measure the panel area you want to cover before ordering to confirm the width you prefer.

Can I install these stripes myself?

Yes. The pair arrives with transfer tape and instructions. A clean surface, a squeegee and some patience are all you need. Most people complete the install in an afternoon, and the vinyl can be repositioned during application before it fully sets.

Will the stripes damage my paint when I remove them?

Applied to factory paint in good condition, the vinyl removes with heat and peels away without leaving residue. We recommend removal on a warm day or with a heat gun or hair dryer on low, pulling slowly at a shallow angle.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.